FD60 fire doors in Sunbury-on-Thames

FD60 fire doors in Sunbury-on-Thames: how we work

Fire Rated Doors supplies and fits FD60 fire doors in Sunbury-on-Thames, Surrey. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.

Sunbury-on-Thames is about 9 miles from Woking; we cover both, along with Walton-on-Thames, Hampton and Hanworth.

What the law says in Sunbury-on-Thames

Because Sunbury-on-Thames is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.

Cost of FD60 fire doors in Surrey

Expect roughly £1,050–£1,650 per single doorset for FD60 fire doors, fitted, ex VAT. Your Sunbury-on-Thames quote is fixed after survey and itemised door by door.

If your fire risk assessment lists specific doors, send it with your enquiry and we'll price exactly those openings.

Where FD60 fire doors are needed

Typical uses for FD60 fire doors in Sunbury-on-Thames include compartment walls and stair cores in taller blocks.

Surrey's commuter towns have many office-to-residential conversions and new apartment schemes, plus independent schools and care homes.

Compartment walls
Stair cores in taller blocks
Plant and boiler rooms
Higher-risk stores

Doorset specification

Fire resistance	60 minutes integrity (FD60 / E60); EI60 where specified
Typical leaf	54mm timber or steel
Smoke control	FD60S available with tested smoke seals
Typical use	Compartment walls, firefighting shafts, plant rooms
Hinges	Usually four hinges on timber leaves, per test evidence

See the full specification and options for FD60 Fire Doorsets

From enquiry to handover

Send your postcode, door count and any fire risk assessment notes
We survey and measure each opening for free
You get a fixed, itemised quote with certificate references
We fit, test operation and hand over the paperwork

Common questions in Surrey

Can you fit just one door in Sunbury-on-Thames?

Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Surrey.

How quickly can you survey in Sunbury-on-Thames?

We arrange surveys around your access needs and, where possible, combine Sunbury-on-Thames visits with other work in Surrey. Tell us your preferred dates when you enquire.

Will I get certificates for the doors fitted in Sunbury-on-Thames?

Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.

Can I use an FD60 door where FD30 is required?

Yes — a higher rating meets a lower requirement — but it is heavier and dearer, so we only recommend it where the location calls for it or you want a margin.

FD60 Fire Doorsets in Sunbury-on-Thames