Our Hampton supply and fit service
Fire Rated Doors supplies and fits FD30S fire doors in Hampton, Greater London. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.
Hampton is about 12 miles from London; we cover both, along with Hanworth, Sunbury-on-Thames and Walton-on-Thames.
Fire door rules in Hampton
Because Hampton is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
What do FD30S fire doors cost in Hampton?
Expect roughly £800–£1,250 per single doorset for FD30S fire doors, fitted, ex VAT. Your Hampton quote is fixed after survey and itemised door by door.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Where FD30S fire doors are needed
In Hampton, FD30S fire doors are typically needed in cross-corridor doors and integral garage doors.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- Cross-corridor doors
- Integral garage doors
- Lobby doors in blocks of flats
- Protected stairways
Doorset specification
| Fire resistance | 30 minutes (FD30 / E30) |
|---|---|
| Smoke control | Tested to BS 476-31.1 or BS EN 1634-3 (Sa) |
| Seals | Combined intumescent and brush or blade smoke seal |
| Typical use | Flat entrances, protected stairs, corridor doors |
| Closer | Overhead or concealed closer to BS EN 1154 |
See the full specification and options for FD30S Smoke Control Doorsets
Four steps to compliant doors
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Common questions in Greater London
Can you fit just one door in Hampton?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Greater London.
Will I get certificates for the doors fitted in Hampton?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Is the survey in Hampton free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Is a threshold seal needed?
It depends on the doorset's test evidence. Some FD30S doorsets need a drop-down or threshold seal; others control smoke with a set threshold gap.
Nearby towns we cover
- Hanworth (1 mile)
- Sunbury-on-Thames (2 miles)
- Walton-on-Thames (2 miles)
- Esher (3 miles)
- Feltham (3 miles)
- Surbiton (3 miles)
More doorsets for Hampton
- Fire Doors for Homes in Hampton
- Flat Entrance Fire Doors in Hampton
- FD30 Fire Doorsets in Hampton
- Composite Fire Doors in Hampton
- FD90 & FD120 Doorsets in Hampton
- Security Fire Doors in Hampton
- School & Healthcare Fire Doors in Hampton
- Communal & Corridor Fire Doors in Hampton
- FD30S Smoke Control Doorsets across Greater London
- All fire doors in Hampton