FD60 fire doors in Dunfermline

Our Dunfermline supply and fit service

For landlords, managing agents, businesses and homeowners in Dunfermline, we provide FD60 doorsets for compartment walls, cores and plant rooms with one fixed quote. A free survey comes first, then a door-by-door schedule, then installation to the manufacturer's instructions and a handover pack for your records.

Surveys in Dunfermline are booked around your access needs, and we cover the wider Fife area too.

Regulations for FD60 fire doors in Fife

In Dunfermline the building standards come from the Scottish Technical Handbooks rather than Approved Document B, and existing non-domestic premises fall under the Fire (Scotland) Act 2005. We specify doorsets against the Scottish requirements and your fire risk assessment.

FD60 fire doors prices in Dunfermline

Our guide for FD60 fire doors is £1,050–£1,650 per single doorset fitted, ex VAT. Quotes for Dunfermline are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.

We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.

Buildings that need FD60 fire doors

Typical uses for FD60 fire doors in Dunfermline include stair cores in taller blocks and higher-risk stores.

Fife's main towns — Dunfermline, Kirkcaldy, Glenrothes — mix newer housing, industry and public buildings, with St Andrews adding student housing.

Stair cores in taller blocks
Higher-risk stores
Plant and boiler rooms
Compartment walls

What's in the doorset

Fire resistance	60 minutes integrity (FD60 / E60); EI60 where specified
Typical leaf	54mm timber or steel
Smoke control	FD60S available with tested smoke seals
Typical use	Compartment walls, firefighting shafts, plant rooms
Hinges	Usually four hinges on timber leaves, per test evidence

See the full specification and options for FD60 Fire Doorsets

How it works in Dunfermline

Send your postcode, door count and any fire risk assessment notes
We survey and measure each opening for free
You get a fixed, itemised quote with certificate references
We fit, test operation and hand over the paperwork

Your questions answered

Is the survey in Dunfermline free?

Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.

What does a Dunfermline quote include?

Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.

Do you work for landlords and managing agents in Dunfermline?

Yes. We can schedule doors flat by flat, send quotes per property and invoice the managing agent or freeholder.

Is there an FD60S?

Yes. FD60S doorsets have tested smoke seals as well as 60 minutes of fire resistance.

FD60 Fire Doorsets in Dunfermline