Certified FD60 fire doors for Livingston
Getting FD60 fire doors right in Livingston means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.
We cover EH54 and the surrounding area, including Bathgate. Tell us your postcode and preferred dates and we'll confirm a survey slot.
Regulations for FD60 fire doors in Edinburgh & the Lothians
Fire doors in Livingston follow Scottish building standards for new work, with the Fire (Scotland) Act 2005 covering duties in workplaces and other non-domestic premises. Shared residential buildings may also be covered by licensing conditions, for example for HMOs.
What do FD60 fire doors cost in Livingston?
Budget around £1,050 to £1,650 per single doorset for FD60 fire doors supplied and fitted in Livingston, excluding VAT. We price each opening separately so nothing is hidden in a lump sum.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Buildings that need FD60 fire doors
In Livingston, FD60 fire doors are typically needed in stair cores in taller blocks and higher-risk stores.
Edinburgh's tenements and conversions, student housing and offices drive demand, with Livingston and the Lothian towns adding newer estates.
- Stair cores in taller blocks
- Higher-risk stores
- Plant and boiler rooms
- Compartment walls
What you get with each doorset
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
How it works in Livingston
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Your questions answered
What does a Livingston quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Livingston.
Can you work around tenants or staff in Livingston?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
How thick is an FD60 door?
Typically 54mm for timber doorsets. Steel FD60 doors vary by manufacturer.
FD60 Fire Doorsets near Livingston
- Bathgate (5 miles)
- Dunfermline (12 miles)
- Falkirk (12 miles)
- Edinburgh (13 miles)
- Airdrie (18 miles)
- Wishaw (18 miles)
More doorsets for Livingston
- Communal & Corridor Fire Doors in Livingston
- Steel Fire Doors in Livingston
- Commercial & Office Fire Doors in Livingston
- Fire-Rated Screens & Fanlights in Livingston
- Double & Leaf-and-a-Half Fire Doors in Livingston
- FD30S Smoke Control Doorsets in Livingston
- Glazed Fire Doors in Livingston
- Riser & Service Cupboard Doors in Livingston
- FD60 Fire Doorsets across Edinburgh & the Lothians
- All fire doors in Livingston