Certified FD30S fire doors for Buxton
We fit FD30S smoke control doorsets for flats, stairs and corridors in Buxton and the rest of Derbyshire. The process is simple: we survey and measure each opening, propose a certified doorset for it, and give you a fixed price. Fitting is booked once the doorsets are made, usually with no door left out of action overnight.
Where possible we combine Buxton surveys with other visits in Derbyshire, such as Macclesfield and Hazel Grove, which helps keep survey dates flexible.
Which rules apply in Buxton?
Fire doors in Buxton sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
Cost of FD30S fire doors in Derbyshire
Budget around £800 to £1,250 per single doorset for FD30S fire doors supplied and fitted in Buxton, excluding VAT. We price each opening separately so nothing is hidden in a lump sum.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Buildings that need FD30S fire doors
Wherever they are in Buxton, FD30S fire doors are most often specified for cross-corridor doors and integral garage doors.
Derbyshire combines Derby's industrial and city-centre buildings with market towns, mill conversions and rural care settings.
- Cross-corridor doors
- Integral garage doors
- Protected stairways
- Lobby doors in blocks of flats
Doorset specification
| Fire resistance | 30 minutes (FD30 / E30) |
|---|---|
| Smoke control | Tested to BS 476-31.1 or BS EN 1634-3 (Sa) |
| Seals | Combined intumescent and brush or blade smoke seal |
| Typical use | Flat entrances, protected stairs, corridor doors |
| Closer | Overhead or concealed closer to BS EN 1154 |
See the full specification and options for FD30S Smoke Control Doorsets
Four steps to compliant doors
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
Common questions in Derbyshire
What does a Buxton quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Will I get certificates for the doors fitted in Buxton?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Buxton.
Which doors in a block of flats need FD30S?
Typically flat entrance doors and doors onto protected stairs and lobbies. The building's fire strategy is the final word.
Nearby towns we cover
- Macclesfield (9 miles)
- Hazel Grove (12 miles)
- Congleton (14 miles)
- Wilmslow (14 miles)
- Cheadle Hulme (14 miles)
- Stockport (15 miles)
More doorsets for Buxton
- Composite Fire Doors in Buxton
- FD60 Fire Doorsets in Buxton
- Security Fire Doors in Buxton
- Fire Door Supply & Fit in Buxton
- Commercial & Office Fire Doors in Buxton
- Stairwell & Escape Route Doors in Buxton
- Glazed Fire Doors in Buxton
- Fire-Rated Screens & Fanlights in Buxton
- FD30S Smoke Control Doorsets across Derbyshire
- All fire doors in Buxton