Certified FD60 fire doors for Stanley
Fire Rated Doors supplies and fits FD60 fire doors in Stanley, County Durham. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.
Stanley is about 24 miles from Darlington; we cover both, along with Chester-le-Street, Consett and Gateshead.
Regulations for FD60 fire doors in County Durham
New and replacement fire doors in Stanley are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
Cost of FD60 fire doors in County Durham
Budget around £1,050 to £1,650 per single doorset for FD60 fire doors supplied and fitted in Stanley, excluding VAT. We price each opening separately so nothing is hidden in a lump sum.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Typical uses in Stanley
Typical uses for FD60 fire doors in Stanley include plant and boiler rooms and stair cores in taller blocks.
County Durham and the Tees side include former industrial towns, terraced housing, student accommodation in Durham and large public estates.
- Plant and boiler rooms
- Stair cores in taller blocks
- Compartment walls
- Higher-risk stores
What you get with each doorset
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
What happens next
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
FD60 fire doors in Stanley: questions
How quickly can you survey in Stanley?
We arrange surveys around your access needs and, where possible, combine Stanley visits with other work in County Durham. Tell us your preferred dates when you enquire.
Can you fit just one door in Stanley?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in County Durham.
Do you cover Stanley?
Yes. We survey, supply and fit FD60 fire doors throughout Stanley and the rest of County Durham, including DH9 and nearby Chester-le-Street.
Is there an FD60S?
Yes. FD60S doorsets have tested smoke seals as well as 60 minutes of fire resistance.
FD60 Fire Doorsets near Stanley
- Chester-le-Street (5 miles)
- Consett (6 miles)
- Gateshead (7 miles)
- Washington (7 miles)
- Felling (7 miles)
- Durham (8 miles)
Also available in Stanley
- FD30S Smoke Control Doorsets in Stanley
- Fire Exit Doors in Stanley
- Steel Fire Doors in Stanley
- Fire Door Supply & Fit in Stanley
- School & Healthcare Fire Doors in Stanley
- Security Fire Doors in Stanley
- Commercial & Office Fire Doors in Stanley
- Double & Leaf-and-a-Half Fire Doors in Stanley
- FD60 Fire Doorsets across County Durham
- All fire doors in Stanley