Getting FD60 fire doors fitted in Washington
Need FD60 fire doors in Washington? We supply and fit complete certified doorsets across Tyne and Wear, starting with a free measure survey in and around NE38. Every quote lists each door, its rating and the manufacturer's certificate reference, so you know exactly what is going in before anything is ordered.
Where possible we combine Washington surveys with other visits in Tyne and Wear, such as Chester-le-Street and Felling, which helps keep survey dates flexible.
Which rules apply in Washington?
New and replacement fire doors in Washington are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
FD60 fire doors prices in Washington
Our guide price for FD60 fire doors in Washington is £1,050 to £1,650 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Where FD60 fire doors are used in Washington
Typical uses for FD60 fire doors in Washington include compartment walls and stair cores in taller blocks.
Newcastle and Sunderland combine city-centre apartments and student housing with a large stock of post-war council blocks and terraces.
- Compartment walls
- Stair cores in taller blocks
- Higher-risk stores
- Plant and boiler rooms
FD60 Fire Doorsets: key specification
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
Four steps to compliant doors
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Questions about FD60 fire doors in Washington
Do you work for landlords and managing agents in Washington?
Yes. We can schedule doors flat by flat, send quotes per property and invoice the managing agent or freeholder.
Is the survey in Washington free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Can you fit just one door in Washington?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Tyne and Wear.
Is there an FD60S?
Yes. FD60S doorsets have tested smoke seals as well as 60 minutes of fire resistance.
Neighbouring areas
- Chester-le-Street (4 miles)
- Felling (4 miles)
- Houghton-le-Spring (4 miles)
- Hebburn (5 miles)
- Sunderland (6 miles)
- Gateshead (6 miles)
Other products in Washington
- Fire Door Supply & Fit in Washington
- Communal & Corridor Fire Doors in Washington
- Flat Entrance Fire Doors in Washington
- Fire-Rated Screens & Fanlights in Washington
- Timber Fire Doorsets in Washington
- FD30 Fire Doorsets in Washington
- Stairwell & Escape Route Doors in Washington
- Glazed Fire Doors in Washington
- FD60 Fire Doorsets across Tyne and Wear
- All fire doors in Washington