FD60 Fire Doorsets for Felling buildings
For landlords, managing agents, businesses and homeowners in Felling, we provide FD60 doorsets for compartment walls, cores and plant rooms with one fixed quote. A free survey comes first, then a door-by-door schedule, then installation to the manufacturer's instructions and a handover pack for your records.
Whether your building is in central Felling or on its edges towards Gateshead, survey and fitting dates are arranged around your access needs, with occupied buildings worked in planned phases.
Regulations for FD60 fire doors in Tyne and Wear
In Felling, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
FD60 fire doors prices in Felling
Expect roughly £1,050–£1,650 per single doorset for FD60 fire doors, fitted, ex VAT. Your Felling quote is fixed after survey and itemised door by door.
If your fire risk assessment lists specific doors, send it with your enquiry and we'll price exactly those openings.
Buildings that need FD60 fire doors
Plant and boiler rooms and stair cores in taller blocks are among the most common settings for FD60 fire doors, in Felling as elsewhere.
Newcastle and Sunderland combine city-centre apartments and student housing with a large stock of post-war council blocks and terraces.
- Plant and boiler rooms
- Stair cores in taller blocks
- Higher-risk stores
- Compartment walls
What's in the doorset
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
From enquiry to handover
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
Questions about FD60 fire doors in Felling
Which rules do FD60 fire doors in Felling need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Can you work around tenants or staff in Felling?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Will I get certificates for the doors fitted in Felling?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Can I use an FD60 door where FD30 is required?
Yes — a higher rating meets a lower requirement — but it is heavier and dearer, so we only recommend it where the location calls for it or you want a margin.
Neighbouring areas
- Gateshead (1 mile)
- Newcastle upon Tyne (2 miles)
- Hebburn (2 miles)
- Wallsend (3 miles)
- Gosforth (4 miles)
- Jarrow (4 miles)
Other fire doors in Felling
- Fire-Rated Screens & Fanlights in Felling
- Security Fire Doors in Felling
- Communal & Corridor Fire Doors in Felling
- Steel Fire Doors in Felling
- Timber Fire Doorsets in Felling
- School & Healthcare Fire Doors in Felling
- Composite Fire Doors in Felling
- Riser & Service Cupboard Doors in Felling
- FD60 Fire Doorsets across Tyne and Wear
- All fire doors in Felling