Getting FD60 fire doors fitted in Consett
Fire Rated Doors supplies and fits FD60 fire doors in Consett, County Durham. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.
Whether your building is in central Consett or on its edges towards Stanley, survey and fitting dates are arranged around your access needs, with occupied buildings worked in planned phases.
Regulations for FD60 fire doors in County Durham
Because Consett is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
Cost of FD60 fire doors in County Durham
Our guide price for FD60 fire doors in Consett is £1,050 to £1,650 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Buildings that need FD60 fire doors
Typical uses for FD60 fire doors in Consett include compartment walls and higher-risk stores.
County Durham and the Tees side include former industrial towns, terraced housing, student accommodation in Durham and large public estates.
- Compartment walls
- Higher-risk stores
- Stair cores in taller blocks
- Plant and boiler rooms
FD60 Fire Doorsets: key specification
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
How it works in Consett
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Your questions answered
Which rules do FD60 fire doors in Consett need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
How quickly can you survey in Consett?
We arrange surveys around your access needs and, where possible, combine Consett visits with other work in County Durham. Tell us your preferred dates when you enquire.
Will I get certificates for the doors fitted in Consett?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
How thick is an FD60 door?
Typically 54mm for timber doorsets. Steel FD60 doors vary by manufacturer.
Neighbouring areas
- Stanley (6 miles)
- Newburn (10 miles)
- Chester-le-Street (10 miles)
- Durham (12 miles)
- Gateshead (12 miles)
- Newcastle upon Tyne (12 miles)
Also available in Consett
- Riser & Service Cupboard Doors in Consett
- Commercial & Office Fire Doors in Consett
- Fire Door Replacement in Consett
- FD90 & FD120 Doorsets in Consett
- Double & Leaf-and-a-Half Fire Doors in Consett
- Fire Doors for Homes in Consett
- Steel Fire Doors in Consett
- Glazed Fire Doors in Consett
- FD60 Fire Doorsets across County Durham
- All fire doors in Consett