Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD60E60 / EI6054mm leaf

FD60 Fire Doorsets in County Down

We supply and fit FD60 fire doors throughout County Down, including Bangor, Castlereagh and Newtownards, as complete certified doorsets with a free survey and a fixed, itemised quote.

From £1,050 per single doorset in County Down, supplied & fitted, ex VAT

Oak-veneered fire doorset pair with vision panel beside a concrete stair

FD60 fire doors in County Down: how we work

Across County Down we handle FD60 fire doors for single doors and whole-building programmes alike — survey, fixed quote, certified doorsets and careful installation.

Which rules apply in County Down?

Northern Ireland has its own building and fire safety legislation, so fire doors in County Down are specified to Technical Booklet E and maintained under the Fire Safety Regulations (Northern Ireland) 2010. We work to your fire risk assessment and building control requirements.

Cost of FD60 fire doors in County Down

Guide prices for FD60 fire doors in County Down run from about £1,050 to £1,650 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.

We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.

Where FD60 fire doors are needed

County Down mixes Belfast's eastern suburbs, Bangor and Newtownards' town centres and Newry's commercial buildings.

  • Compartment walls
  • Stair cores in taller blocks
  • Plant and boiler rooms
  • Higher-risk stores

What you get with each doorset

Fire resistance60 minutes integrity (FD60 / E60); EI60 where specified
Typical leaf54mm timber or steel
Smoke controlFD60S available with tested smoke seals
Typical useCompartment walls, firefighting shafts, plant rooms
HingesUsually four hinges on timber leaves, per test evidence
Elevation drawing of fd60 fire doorsets

See the full specification and options for FD60 Fire Doorsets

Four steps to compliant doors

  1. Send your postcode, door count and any fire risk assessment notes
  2. We survey and measure each opening for free
  3. You get a fixed, itemised quote with certificate references
  4. We fit, test operation and hand over the paperwork

Your questions answered

Can you fit just one door?

Yes — from a single door to a full building.

How quickly can you survey in County Down?

We arrange surveys around your access needs and, where possible, combine visits with other work in County Down. Tell us your preferred dates when you enquire.

Which rules apply in County Down?

Doors are specified to Technical Booklet E (Northern Ireland) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.

Can I use an FD60 door where FD30 is required?

Yes — a higher rating meets a lower requirement — but it is heavier and dearer, so we only recommend it where the location calls for it or you want a margin.

Towns in County Down we cover for FD60 fire doors

FD60 Fire Doorsets in neighbouring areas

Other fire doors in County Down

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.