Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD60E60 / EI6054mm leaf

FD60 Fire Doorsets in County Armagh

We supply and fit FD60 fire doors throughout County Armagh, including Craigavon and Portadown, as complete certified doorsets with a free survey and a fixed, itemised quote.

From £1,050 per single doorset in County Armagh, supplied & fitted, ex VAT

Oak-veneered fire doorset pair with vision panel beside a concrete stair

Our County Armagh supply and fit service

We supply and fit FD60 fire doors across County Armagh, including Craigavon and Portadown. Every job starts with a free measure survey and ends with a handover pack listing each certified doorset fitted.

Fire door rules in County Armagh

In County Armagh, fire doors in new and altered buildings are designed to the Building Regulations (Northern Ireland) 2012 and Technical Booklet E. Existing premises fall under the Fire and Rescue Services (Northern Ireland) Order 2006 and the Fire Safety Regulations (Northern Ireland) 2010.

What do FD60 fire doors cost in County Armagh?

Our guide for FD60 fire doors is £1,050–£1,650 per single doorset fitted, ex VAT. Quotes for County Armagh are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.

Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.

Where FD60 fire doors are used in County Armagh

Craigavon, Portadown and Armagh combine housing estates, schools and industrial units.

  • Compartment walls
  • Stair cores in taller blocks
  • Plant and boiler rooms
  • Higher-risk stores

What's in the doorset

Fire resistance60 minutes integrity (FD60 / E60); EI60 where specified
Typical leaf54mm timber or steel
Smoke controlFD60S available with tested smoke seals
Typical useCompartment walls, firefighting shafts, plant rooms
HingesUsually four hinges on timber leaves, per test evidence
Elevation drawing of fd60 fire doorsets

See the full specification and options for FD60 Fire Doorsets

How it works in County Armagh

  1. Send your postcode, door count and any fire risk assessment notes
  2. We survey and measure each opening for free
  3. You get a fixed, itemised quote with certificate references
  4. We fit, test operation and hand over the paperwork

FD60 fire doors in County Armagh: questions

Can you work around tenants or staff?

Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.

Which rules apply in County Armagh?

Doors are specified to Technical Booklet E (Northern Ireland) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.

Do you cover the whole of County Armagh?

Yes. We survey, supply and fit FD60 fire doors across County Armagh, including Craigavon and Portadown.

Do FD60 doors need different closers?

Often a stronger closer, sized to the heavier leaf, still keeping opening forces within Approved Document M limits where accessibility applies.

Towns in County Armagh we cover for FD60 fire doors

FD60 Fire Doorsets in neighbouring areas

Other fire doors in County Armagh

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.