Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD30SE30 SaSmoke seals

FD30S Smoke Control Doorsets in Highlands, Moray & Islands

We supply and fit FD30S fire doors throughout Highlands, Moray & Islands, including Inverness and Elgin, as complete certified doorsets with a free survey and a fixed, itemised quote.

From £800 per single doorset in Highlands, Moray & Islands, supplied & fitted, ex VAT

Close-up of an intumescent strip and brush smoke seal set into a fire door frame

FD30S Smoke Control Doorsets for Highlands, Moray & Islands buildings

We supply and fit FD30S fire doors across Highlands, Moray & Islands, including Inverness and Elgin. Every job starts with a free measure survey and ends with a handover pack listing each certified doorset fitted.

Which rules apply in Highlands, Moray & Islands?

Fire doors in Highlands, Moray & Islands follow Scottish building standards for new work, with the Fire (Scotland) Act 2005 covering duties in workplaces and other non-domestic premises. Shared residential buildings may also be covered by licensing conditions, for example for HMOs.

What do FD30S fire doors cost in Highlands, Moray & Islands?

Budget around £800 to £1,250 per single doorset for FD30S fire doors supplied and fitted in Highlands, Moray & Islands, excluding VAT. We price each opening separately so nothing is hidden in a lump sum.

Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.

Where FD30S fire doors are needed

The Highlands, Moray and the islands are rural, with Inverness and Elgin's town centres, schools, hospitals and hotels driving demand.

  • Protected stairways
  • Cross-corridor doors
  • Integral garage doors
  • Lobby doors in blocks of flats

What's in the doorset

Fire resistance30 minutes (FD30 / E30)
Smoke controlTested to BS 476-31.1 or BS EN 1634-3 (Sa)
SealsCombined intumescent and brush or blade smoke seal
Typical useFlat entrances, protected stairs, corridor doors
CloserOverhead or concealed closer to BS EN 1154
Elevation drawing of fd30s smoke control doorsets

See the full specification and options for FD30S Smoke Control Doorsets

From enquiry to handover

  1. Tell us about the doors — photos help
  2. Free measure survey at your Highlands, Moray & Islands property
  3. Door-by-door schedule and fixed price
  4. Installation and handover pack

Your questions answered

Do you remove the old doors?

Yes. Removal and disposal of the old door and frame is included when we replace a doorset.

Can you fit just one door?

Yes — from a single door to a full building.

Will I get certificates for the doors fitted?

Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.

Do smoke seals stop the door closing?

They shouldn't. A properly hung FD30S door closes and latches under its closer. If seals are crushed or the door binds, it needs adjusting — a door that fails to latch is a failed fire door.

Towns in Highlands, Moray & Islands we cover for FD30S fire doors

FD30S Smoke Control Doorsets in neighbouring areas

Other fire doors in Highlands, Moray & Islands

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.