Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD30SE30 SaSmoke seals

FD30S Smoke Control Doorsets in Argyll & Bute

We supply and fit FD30S fire doors throughout Argyll & Bute, including Helensburgh and Oban, as complete certified doorsets with a free survey and a fixed, itemised quote.

From £800 per single doorset in Argyll & Bute, supplied & fitted, ex VAT

Close-up of an intumescent strip and brush smoke seal set into a fire door frame

Our Argyll & Bute supply and fit service

Our Argyll & Bute service covers FD30S fire doors for flats, HMOs, workplaces, schools and homes, including Helensburgh and Oban.

Which rules apply in Argyll & Bute?

Fire doors in Argyll & Bute follow Scottish building standards for new work, with the Fire (Scotland) Act 2005 covering duties in workplaces and other non-domestic premises. Shared residential buildings may also be covered by licensing conditions, for example for HMOs.

Cost of FD30S fire doors in Argyll & Bute

Guide prices for FD30S fire doors in Argyll & Bute run from about £800 to £1,250 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.

Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.

Where FD30S fire doors are used in Argyll & Bute

Argyll and Bute is largely rural and coastal, with hotels, schools and care homes in towns such as Helensburgh and Oban.

  • Protected stairways
  • Cross-corridor doors
  • Integral garage doors
  • Lobby doors in blocks of flats

Doorset specification

Fire resistance30 minutes (FD30 / E30)
Smoke controlTested to BS 476-31.1 or BS EN 1634-3 (Sa)
SealsCombined intumescent and brush or blade smoke seal
Typical useFlat entrances, protected stairs, corridor doors
CloserOverhead or concealed closer to BS EN 1154
Elevation drawing of fd30s smoke control doorsets

See the full specification and options for FD30S Smoke Control Doorsets

From enquiry to handover

  1. Share your FRA or inspection findings
  2. We confirm every door on site
  3. Fixed quote, certified doorsets only
  4. Fitted to the manufacturer's instructions, with photos

Questions about FD30S fire doors in Argyll & Bute

Do you remove the old doors?

Yes. Removal and disposal of the old door and frame is included when we replace a doorset.

Can you work around tenants or staff?

Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.

Can you fit just one door?

Yes — from a single door to a full building.

Is a threshold seal needed?

It depends on the doorset's test evidence. Some FD30S doorsets need a drop-down or threshold seal; others control smoke with a set threshold gap.

Towns in Argyll & Bute we cover for FD30S fire doors

FD30S Smoke Control Doorsets in neighbouring areas

Other fire doors in Argyll & Bute

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.