FD30S Smoke Control Doorsets for Inverness buildings
We fit FD30S smoke control doorsets for flats, stairs and corridors in Inverness and the rest of Highlands, Moray & Islands. The process is simple: we survey and measure each opening, propose a certified doorset for it, and give you a fixed price. Fitting is booked once the doorsets are made, usually with no door left out of action overnight.
Surveys in Inverness are booked around your access needs, and we cover the wider Highlands, Moray & Islands area too.
Which rules apply in Inverness?
Fire doors in Inverness follow Scottish building standards for new work, with the Fire (Scotland) Act 2005 covering duties in workplaces and other non-domestic premises. Shared residential buildings may also be covered by licensing conditions, for example for HMOs.
Cost of FD30S fire doors in Highlands, Moray & Islands
Guide prices for FD30S fire doors in Inverness run from about £800 to £1,250 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.
Typical uses in Inverness
Typical uses for FD30S fire doors in Inverness include protected stairways and cross-corridor doors.
The Highlands, Moray and the islands are rural, with Inverness and Elgin's town centres, schools, hospitals and hotels driving demand.
- Protected stairways
- Cross-corridor doors
- Integral garage doors
- Lobby doors in blocks of flats
Doorset specification
| Fire resistance | 30 minutes (FD30 / E30) |
|---|---|
| Smoke control | Tested to BS 476-31.1 or BS EN 1634-3 (Sa) |
| Seals | Combined intumescent and brush or blade smoke seal |
| Typical use | Flat entrances, protected stairs, corridor doors |
| Closer | Overhead or concealed closer to BS EN 1154 |
See the full specification and options for FD30S Smoke Control Doorsets
From enquiry to handover
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
Your questions answered
Do you cover Inverness?
Yes. We survey, supply and fit FD30S fire doors throughout Inverness and the rest of Highlands, Moray & Islands, including IV1 and nearby Elgin.
Which rules do FD30S fire doors in Inverness need to meet?
They are specified to the Scottish Building Standards Technical Handbooks and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
How quickly can you survey in Inverness?
We arrange surveys around your access needs and, where possible, combine Inverness visits with other work in Highlands, Moray & Islands. Tell us your preferred dates when you enquire.
Do smoke seals stop the door closing?
They shouldn't. A properly hung FD30S door closes and latches under its closer. If seals are crushed or the door binds, it needs adjusting — a door that fails to latch is a failed fire door.
Also covering towns near Inverness
- Elgin (35 miles)
- Inverurie (70 miles)
- Perth (81 miles)
- Aberdeen (83 miles)
- Dundee (84 miles)
- Oban (87 miles)
Other fire doors in Inverness
- FD30 Fire Doorsets in Inverness
- Fire Exit Doors in Inverness
- Stairwell & Escape Route Doors in Inverness
- FD90 & FD120 Doorsets in Inverness
- Riser & Service Cupboard Doors in Inverness
- Timber Fire Doorsets in Inverness
- Steel Fire Doors in Inverness
- HMO Fire Doors in Inverness
- FD30S Smoke Control Doorsets across Highlands, Moray & Islands
- All fire doors in Inverness