Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD60E60 / EI6054mm leaf

FD60 Fire Doorsets in Highlands, Moray & Islands

We supply and fit FD60 fire doors throughout Highlands, Moray & Islands, including Inverness and Elgin, as complete certified doorsets with a free survey and a fixed, itemised quote.

From £1,050 per single doorset in Highlands, Moray & Islands, supplied & fitted, ex VAT

Oak-veneered fire doorset pair with vision panel beside a concrete stair

FD60 Fire Doorsets for Highlands, Moray & Islands buildings

Our Highlands, Moray & Islands service covers FD60 fire doors for flats, HMOs, workplaces, schools and homes, including Inverness and Elgin.

What the law says in Highlands, Moray & Islands

In Highlands, Moray & Islands the building standards come from the Scottish Technical Handbooks rather than Approved Document B, and existing non-domestic premises fall under the Fire (Scotland) Act 2005. We specify doorsets against the Scottish requirements and your fire risk assessment.

FD60 fire doors prices in Highlands, Moray & Islands

Expect roughly £1,050–£1,650 per single doorset for FD60 fire doors, fitted, ex VAT. Your Highlands, Moray & Islands quote is fixed after survey and itemised door by door.

We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.

Where FD60 fire doors are needed

The Highlands, Moray and the islands are rural, with Inverness and Elgin's town centres, schools, hospitals and hotels driving demand.

  • Compartment walls
  • Stair cores in taller blocks
  • Plant and boiler rooms
  • Higher-risk stores

Doorset specification

Fire resistance60 minutes integrity (FD60 / E60); EI60 where specified
Typical leaf54mm timber or steel
Smoke controlFD60S available with tested smoke seals
Typical useCompartment walls, firefighting shafts, plant rooms
HingesUsually four hinges on timber leaves, per test evidence
Elevation drawing of fd60 fire doorsets

See the full specification and options for FD60 Fire Doorsets

What happens next

  1. Share your FRA or inspection findings
  2. We confirm every door on site
  3. Fixed quote, certified doorsets only
  4. Fitted to the manufacturer's instructions, with photos

Questions about FD60 fire doors in Highlands, Moray & Islands

How quickly can you survey in Highlands, Moray & Islands?

We arrange surveys around your access needs and, where possible, combine visits with other work in Highlands, Moray & Islands. Tell us your preferred dates when you enquire.

Is the survey free?

Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.

Which rules apply in Highlands, Moray & Islands?

Doors are specified to the Scottish Building Standards Technical Handbooks and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.

Do FD60 doors need different closers?

Often a stronger closer, sized to the heavier leaf, still keeping opening forces within Approved Document M limits where accessibility applies.

Towns in Highlands, Moray & Islands we cover for FD60 fire doors

FD60 Fire Doorsets in neighbouring areas

Other fire doors in Highlands, Moray & Islands

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.