Getting FD30S fire doors fitted in Chelmsford
Getting FD30S fire doors right in Chelmsford means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.
Our Essex coverage includes Chelmsford and its neighbours Billericay, Witham and Maldon; tell us your postcode and preferred dates and we'll confirm a survey slot.
Regulations for FD30S fire doors in Essex
In Chelmsford, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
FD30S fire doors prices in Chelmsford
Guide prices for FD30S fire doors in Chelmsford run from about £800 to £1,250 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Where FD30S fire doors are needed
Wherever they are in Chelmsford, FD30S fire doors are most often specified for integral garage doors and lobby doors in blocks of flats.
Essex covers commuter towns, new estates and large town-centre flat developments, from Southend and Basildon to Chelmsford and Colchester.
- Integral garage doors
- Lobby doors in blocks of flats
- Cross-corridor doors
- Protected stairways
FD30S Smoke Control Doorsets: key specification
| Fire resistance | 30 minutes (FD30 / E30) |
|---|---|
| Smoke control | Tested to BS 476-31.1 or BS EN 1634-3 (Sa) |
| Seals | Combined intumescent and brush or blade smoke seal |
| Typical use | Flat entrances, protected stairs, corridor doors |
| Closer | Overhead or concealed closer to BS EN 1154 |
See the full specification and options for FD30S Smoke Control Doorsets
Four steps to compliant doors
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
FD30S fire doors in Chelmsford: questions
Can you work around tenants or staff in Chelmsford?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Is the survey in Chelmsford free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Do you work for landlords and managing agents in Chelmsford?
Yes. We can schedule doors flat by flat, send quotes per property and invoice the managing agent or freeholder.
Do smoke seals stop the door closing?
They shouldn't. A properly hung FD30S door closes and latches under its closer. If seals are crushed or the door binds, it needs adjusting — a door that fails to latch is a failed fire door.
Neighbouring areas
- Billericay (7 miles)
- Witham (9 miles)
- Maldon (9 miles)
- Wickford (9 miles)
- Braintree (11 miles)
- Brentwood (11 miles)
Other products in Chelmsford
- Fire Exit Doors in Chelmsford
- Commercial & Office Fire Doors in Chelmsford
- Fire Doors for Homes in Chelmsford
- Security Fire Doors in Chelmsford
- Fire Door Replacement in Chelmsford
- Composite Fire Doors in Chelmsford
- HMO Fire Doors in Chelmsford
- Stairwell & Escape Route Doors in Chelmsford
- FD30S Smoke Control Doorsets across Essex
- All fire doors in Chelmsford