FD30S fire doors in Billericay: how we work
Getting FD30S fire doors right in Billericay means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.
Billericay is about 14 miles from Southend-on-Sea; we cover both, along with Basildon, Wickford and Brentwood.
Regulations for FD30S fire doors in Essex
New and replacement fire doors in Billericay are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
FD30S fire doors prices in Billericay
Guide prices for FD30S fire doors in Billericay run from about £800 to £1,250 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.
Where FD30S fire doors are used in Billericay
Lobby doors in blocks of flats and integral garage doors are among the most common settings for FD30S fire doors, in Billericay as elsewhere.
Essex covers commuter towns, new estates and large town-centre flat developments, from Southend and Basildon to Chelmsford and Colchester.
- Lobby doors in blocks of flats
- Integral garage doors
- Cross-corridor doors
- Protected stairways
FD30S Smoke Control Doorsets: key specification
| Fire resistance | 30 minutes (FD30 / E30) |
|---|---|
| Smoke control | Tested to BS 476-31.1 or BS EN 1634-3 (Sa) |
| Seals | Combined intumescent and brush or blade smoke seal |
| Typical use | Flat entrances, protected stairs, corridor doors |
| Closer | Overhead or concealed closer to BS EN 1154 |
See the full specification and options for FD30S Smoke Control Doorsets
From enquiry to handover
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Questions about FD30S fire doors in Billericay
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Billericay.
Is the survey in Billericay free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Can you fit just one door in Billericay?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Essex.
What is the difference between FD30 and FD30S?
Both resist fire for 30 minutes. FD30S also has tested smoke seals that limit cold smoke passing around the leaf before the intumescent strip activates.
Nearby towns we cover
- Basildon (4 miles)
- Wickford (4 miles)
- Brentwood (5 miles)
- Pitsea (6 miles)
- Stanford-le-Hope (7 miles)
- Chelmsford (7 miles)
More doorsets for Billericay
- Commercial & Office Fire Doors in Billericay
- Acoustic Fire Doors in Billericay
- Fire Door Ironmongery & Closers in Billericay
- Fire Door Supply & Fit in Billericay
- Steel Fire Doors in Billericay
- Fire-Rated Screens & Fanlights in Billericay
- Composite Fire Doors in Billericay
- Security Fire Doors in Billericay
- FD30S Smoke Control Doorsets across Essex
- All fire doors in Billericay