Getting FD30 fire doors fitted in Stratford-upon-Avon
Getting FD30 fire doors right in Stratford-upon-Avon means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.
Stratford-upon-Avon is about 25 miles from Nuneaton. Wherever your building is in CV37, we arrange survey and fitting dates around access and occupancy.
What the law says in Stratford-upon-Avon
In Stratford-upon-Avon, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
Cost of FD30 fire doors in Warwickshire
Our guide for FD30 fire doors is £750–£1,150 per single doorset fitted, ex VAT. Quotes for Stratford-upon-Avon are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Guide prices assume straightforward access; out-of-hours working or difficult access is priced as a separate, visible line.
Where FD30 fire doors are used in Stratford-upon-Avon
Wherever they are in Stratford-upon-Avon, FD30 fire doors are most often specified for offices and retail back-of-house and HMO bedrooms and kitchens.
Warwickshire mixes Nuneaton and Rugby's logistics and new estates with Leamington and Stratford's period conversions and hotels.
- Offices and retail back-of-house
- HMO bedrooms and kitchens
- Plant rooms and stores
- Hotel corridors
FD30 Fire Doorsets: key specification
| Fire resistance | 30 minutes integrity (FD30 / E30); EI30 where insulation is specified |
|---|---|
| Typical leaf | 44mm timber, flush or with vision panel |
| Test evidence | BS 476-22 or BS EN 1634-1, plus the manufacturer's field of application |
| Closer | Overhead closer to BS EN 1154 (except locked cupboards) |
| Hinges | Three CE/UKCA-marked hinges to BS EN 1935, grade 13 typical |
See the full specification and options for FD30 Fire Doorsets
How it works in Stratford-upon-Avon
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Questions about FD30 fire doors in Stratford-upon-Avon
Do you work for landlords and managing agents in Stratford-upon-Avon?
Yes. We can schedule doors flat by flat, send quotes per property and invoice the managing agent or freeholder.
Will I get certificates for the doors fitted in Stratford-upon-Avon?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Is the survey in Stratford-upon-Avon free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
How thick is an FD30 door?
Most FD30 timber leaves are 44mm thick. FD60 leaves are typically 54mm.
Also covering towns near Stratford-upon-Avon
- Warwick (8 miles)
- Leamington Spa (10 miles)
- Kenilworth (12 miles)
- Evesham (12 miles)
- Redditch (13 miles)
- Solihull (16 miles)
Other fire doors in Stratford-upon-Avon
- Communal & Corridor Fire Doors in Stratford-upon-Avon
- FD90 & FD120 Doorsets in Stratford-upon-Avon
- Timber Fire Doorsets in Stratford-upon-Avon
- Security Fire Doors in Stratford-upon-Avon
- Double & Leaf-and-a-Half Fire Doors in Stratford-upon-Avon
- Commercial & Office Fire Doors in Stratford-upon-Avon
- FD30S Smoke Control Doorsets in Stratford-upon-Avon
- Fire-Rated Screens & Fanlights in Stratford-upon-Avon
- FD30 Fire Doorsets across Warwickshire
- All fire doors in Stratford-upon-Avon