Our Hartlepool supply and fit service
For landlords, managing agents, businesses and homeowners in Hartlepool, we provide FD30 doorsets for flats, offices, HMOs and corridors with one fixed quote. A free survey comes first, then a door-by-door schedule, then installation to the manufacturer's instructions and a handover pack for your records.
Hartlepool is about 17 miles from Darlington; we cover both, along with Peterlee, Billingham and Middlesbrough.
Regulations for FD30 fire doors in County Durham
Fire doors in Hartlepool sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
What do FD30 fire doors cost in Hartlepool?
Guide prices for FD30 fire doors in Hartlepool run from about £750 to £1,150 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.
Typical uses in Hartlepool
Wherever they are in Hartlepool, FD30 fire doors are most often specified for hotel corridors and HMO bedrooms and kitchens.
County Durham and the Tees side include former industrial towns, terraced housing, student accommodation in Durham and large public estates.
- Hotel corridors
- HMO bedrooms and kitchens
- Offices and retail back-of-house
- Plant rooms and stores
What's in the doorset
| Fire resistance | 30 minutes integrity (FD30 / E30); EI30 where insulation is specified |
|---|---|
| Typical leaf | 44mm timber, flush or with vision panel |
| Test evidence | BS 476-22 or BS EN 1634-1, plus the manufacturer's field of application |
| Closer | Overhead closer to BS EN 1154 (except locked cupboards) |
| Hinges | Three CE/UKCA-marked hinges to BS EN 1935, grade 13 typical |
See the full specification and options for FD30 Fire Doorsets
From enquiry to handover
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
Your questions answered
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Hartlepool.
Can you fit just one door in Hartlepool?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in County Durham.
Which rules do FD30 fire doors in Hartlepool need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
How thick is an FD30 door?
Most FD30 timber leaves are 44mm thick. FD60 leaves are typically 54mm.
Nearby towns we cover
- Peterlee (7 miles)
- Billingham (7 miles)
- Middlesbrough (7 miles)
- Redcar (7 miles)
- Stockton-on-Tees (9 miles)
- Thornaby-on-Tees (11 miles)
Other products in Hartlepool
- Communal & Corridor Fire Doors in Hartlepool
- FD30S Smoke Control Doorsets in Hartlepool
- Commercial & Office Fire Doors in Hartlepool
- Security Fire Doors in Hartlepool
- Fire Door Replacement in Hartlepool
- Fire Door Supply & Fit in Hartlepool
- Timber Fire Doorsets in Hartlepool
- Fire Doors for Homes in Hartlepool
- FD30 Fire Doorsets across County Durham
- All fire doors in Hartlepool