Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD30E30 / EI3044mm leaf

FD30 Fire Doorsets in Dorset

We supply and fit FD30 fire doors throughout Dorset, including Bournemouth, Poole and Weymouth, as complete certified doorsets with a free survey and a fixed, itemised quote.

From £750 per single doorset in Dorset, supplied & fitted, ex VAT

White painted flush timber fire door with overhead closer in an office corridor

Certified FD30 fire doors for Dorset

Throughout Dorset, including Bournemouth, Poole and Weymouth, we survey, quote and fit FD30 doorsets for flats, offices, HMOs and corridors as complete certified doorsets, with the manufacturer's certificate reference on every quote.

Regulations for FD30 fire doors in Dorset

In Dorset, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.

Cost of FD30 fire doors in Dorset

Expect roughly £750–£1,150 per single doorset for FD30 fire doors, fitted, ex VAT. Your Dorset quote is fixed after survey and itemised door by door.

We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.

Typical uses in Dorset

Dorset's coastal towns have many converted houses, holiday flats and care homes, especially around Bournemouth, Poole and Christchurch.

  • Offices and retail back-of-house
  • HMO bedrooms and kitchens
  • Hotel corridors
  • Plant rooms and stores

What you get with each doorset

Fire resistance30 minutes integrity (FD30 / E30); EI30 where insulation is specified
Typical leaf44mm timber, flush or with vision panel
Test evidenceBS 476-22 or BS EN 1634-1, plus the manufacturer's field of application
CloserOverhead closer to BS EN 1154 (except locked cupboards)
HingesThree CE/UKCA-marked hinges to BS EN 1935, grade 13 typical
Elevation drawing of fd30 fire doorsets

See the full specification and options for FD30 Fire Doorsets

From enquiry to handover

  1. Request a quote online or call
  2. Survey: sizes, ratings, hardware and condition
  3. Quote with each doorset's certification
  4. Phased fitting and handover records

Common questions in Dorset

Do you remove the old doors?

Yes. Removal and disposal of the old door and frame is included when we replace a doorset.

Can you work around tenants or staff?

Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.

Can you fit just one door?

Yes — from a single door to a full building.

Can I fit an FD30 door into my existing frame?

Only if the manufacturer's evidence allows that frame, which is rare. We normally supply the complete doorset with a new frame so the certification carries through to the finished job.

Towns in Dorset we cover for FD30 fire doors

FD30 Fire Doorsets in neighbouring areas

Other fire doors in Dorset

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.