Getting FD30 fire doors fitted in Christchurch
Fire Rated Doors supplies and fits FD30 fire doors in Christchurch, Dorset. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.
Our Dorset coverage includes Christchurch and its neighbours Bournemouth, New Milton and Poole; tell us your postcode and preferred dates and we'll confirm a survey slot.
What the law says in Christchurch
New and replacement fire doors in Christchurch are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
Cost of FD30 fire doors in Dorset
Our guide price for FD30 fire doors in Christchurch is £750 to £1,150 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
If your fire risk assessment lists specific doors, send it with your enquiry and we'll price exactly those openings.
Typical uses in Christchurch
HMO bedrooms and kitchens and hotel corridors are among the most common settings for FD30 fire doors, in Christchurch as elsewhere.
Dorset's coastal towns have many converted houses, holiday flats and care homes, especially around Bournemouth, Poole and Christchurch.
- HMO bedrooms and kitchens
- Hotel corridors
- Plant rooms and stores
- Offices and retail back-of-house
Doorset specification
| Fire resistance | 30 minutes integrity (FD30 / E30); EI30 where insulation is specified |
|---|---|
| Typical leaf | 44mm timber, flush or with vision panel |
| Test evidence | BS 476-22 or BS EN 1634-1, plus the manufacturer's field of application |
| Closer | Overhead closer to BS EN 1154 (except locked cupboards) |
| Hinges | Three CE/UKCA-marked hinges to BS EN 1935, grade 13 typical |
See the full specification and options for FD30 Fire Doorsets
What happens next
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Your questions answered
Will I get certificates for the doors fitted in Christchurch?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Is the survey in Christchurch free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
What does a Christchurch quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Can I fit an FD30 door into my existing frame?
Only if the manufacturer's evidence allows that frame, which is rare. We normally supply the complete doorset with a new frame so the certification carries through to the finished job.
Nearby towns we cover
- Bournemouth (4 miles)
- New Milton (5 miles)
- Poole (9 miles)
- Totton (18 miles)
- Hythe (19 miles)
- Southampton (20 miles)
Other fire doors in Christchurch
- Stairwell & Escape Route Doors in Christchurch
- Fire Door Ironmongery & Closers in Christchurch
- Glazed Fire Doors in Christchurch
- Fire Door Supply & Fit in Christchurch
- Fire Door Replacement in Christchurch
- Communal & Corridor Fire Doors in Christchurch
- Commercial & Office Fire Doors in Christchurch
- Steel Fire Doors in Christchurch
- FD30 Fire Doorsets across Dorset
- All fire doors in Christchurch