Our Luton supply and fit service
Getting FD30 fire doors right in Luton means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.
Luton is one of the main towns we cover in Bedfordshire; tell us your dates and we'll arrange a survey.
Which rules apply in Luton?
Fire doors in Luton sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
What do FD30 fire doors cost in Luton?
Our guide for FD30 fire doors is £750–£1,150 per single doorset fitted, ex VAT. Quotes for Luton are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Typical uses in Luton
Typical uses for FD30 fire doors in Luton include HMO bedrooms and kitchens and hotel corridors.
Bedfordshire mixes Luton's dense housing and town-centre flats with Bedford's Victorian terraces, many now converted to flats and HMOs.
- HMO bedrooms and kitchens
- Hotel corridors
- Plant rooms and stores
- Offices and retail back-of-house
What you get with each doorset
| Fire resistance | 30 minutes integrity (FD30 / E30); EI30 where insulation is specified |
|---|---|
| Typical leaf | 44mm timber, flush or with vision panel |
| Test evidence | BS 476-22 or BS EN 1634-1, plus the manufacturer's field of application |
| Closer | Overhead closer to BS EN 1154 (except locked cupboards) |
| Hinges | Three CE/UKCA-marked hinges to BS EN 1935, grade 13 typical |
See the full specification and options for FD30 Fire Doorsets
From enquiry to handover
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
Questions about FD30 fire doors in Luton
Can you work around tenants or staff in Luton?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Luton.
What does a Luton quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Is FD30 the same as E30?
Broadly, yes. FD30 comes from the British test (BS 476-22); E30 is the European classification from BS EN 1634-1. Both mean 30 minutes of integrity. EI30 adds insulation, which some locations and glazed doors need.
Neighbouring areas
- Dunstable (4 miles)
- Harpenden (5 miles)
- Hitchin (7 miles)
- Hemel Hempstead (9 miles)
- Stevenage (9 miles)
- St Albans (10 miles)