Riser cupboard fire doors in Ebbw Vale: how we work
Fire Rated Doors supplies and fits riser cupboard fire doors in Ebbw Vale, Gwent. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.
We cover NP23 and the surrounding area, including Merthyr Tydfil. Tell us your postcode and preferred dates and we'll confirm a survey slot.
What the law says in Ebbw Vale
In Ebbw Vale the specification follows Approved Document B as published for Wales, while day-to-day duties to keep fire doors working come from the Regulatory Reform (Fire Safety) Order 2005. The England-only door-check regulations of 2022 don't apply in Wales, but regular checks remain good practice and are expected by fire risk assessors.
What do riser cupboard fire doors cost in Ebbw Vale?
Our guide price for riser cupboard fire doors in Ebbw Vale is £550 to £950 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
Guide prices assume straightforward access; out-of-hours working or difficult access is priced as a separate, visible line.
Where riser cupboard fire doors are used in Ebbw Vale
In Ebbw Vale, riser cupboard fire doors are typically needed in meter cupboards and plumbing ducts.
Gwent centres on Newport's city centre and council estates, with Cwmbran, Pontypool and the valleys towns adding schools and industry.
- Meter cupboards
- Plumbing ducts
- Bin and store cupboards
- Electrical and data risers
Riser & Service Cupboard Doors: key specification
| Rating | At least half the shaft wall's rating, 30 minutes minimum — FD30 typical |
|---|---|
| Closing | Kept locked shut; self-closer not normally required |
| Locking | Flush cylinder or budget lock, tested with the door |
| Finish | Flush, painted or laminated to match the corridor |
| Signage | Fire door keep locked |
See the full specification and options for Riser & Service Cupboard Doors
How it works in Ebbw Vale
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Common questions in Gwent
Will I get certificates for the doors fitted in Ebbw Vale?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Ebbw Vale.
What does a Ebbw Vale quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
What rating does a riser door need?
In England, Approved Document B generally asks for at least half the fire resistance of the shaft wall, with a 30-minute minimum — so FD30 is typical, rising to FD60 for 120-minute shafts. Your fire strategy confirms it.
Also covering towns near Ebbw Vale
- Merthyr Tydfil (7 miles)
- Pontypool (9 miles)
- Aberdare (11 miles)
- Cwmbran (12 miles)
- Risca (12 miles)
- Rhondda (13 miles)
Other fire doors in Ebbw Vale
- Commercial & Office Fire Doors in Ebbw Vale
- Composite Fire Doors in Ebbw Vale
- Stairwell & Escape Route Doors in Ebbw Vale
- Timber Fire Doorsets in Ebbw Vale
- Fire Doors for Homes in Ebbw Vale
- Acoustic Fire Doors in Ebbw Vale
- Fire Door Replacement in Ebbw Vale
- Double & Leaf-and-a-Half Fire Doors in Ebbw Vale
- Riser & Service Cupboard Doors across Gwent
- All fire doors in Ebbw Vale