Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD30 typicalKeep lockedFlush

Riser & Service Cupboard Doors in Tonypandy

We supply and fit riser cupboard fire doors in Tonypandy (CF40) as complete certified doorsets — with a free measure survey, a fixed itemised quote listing every certificate reference, and installation exactly as tested.

From £550 per single doorset in Tonypandy, supplied & fitted, ex VAT

Flush painted service riser cupboard door set into a corridor wall

Riser cupboard fire doors in Tonypandy: how we work

Fire Rated Doors supplies and fits riser cupboard fire doors in Tonypandy, Mid Glamorgan. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.

Tonypandy is about 2 miles from Rhondda. Wherever your building is in CF40, we arrange survey and fitting dates around access and occupancy.

What the law says in Tonypandy

Fire doors in Tonypandy are covered by the Welsh Building Regulations guidance for new work and by the Fire Safety Order 2005 for existing premises. Your fire risk assessment will say which doors need replacing and to what rating.

Cost of riser cupboard fire doors in Mid Glamorgan

Our guide for riser cupboard fire doors is £550–£950 per single doorset fitted, ex VAT. Quotes for Tonypandy are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.

Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.

Where riser cupboard fire doors are needed

In Tonypandy, riser cupboard fire doors are typically needed in electrical and data risers and plumbing ducts.

The valleys towns of Mid Glamorgan have extensive terraced housing, schools and public buildings, with Bridgend adding industrial estates.

  • Electrical and data risers
  • Plumbing ducts
  • Meter cupboards
  • Bin and store cupboards

Riser & Service Cupboard Doors: key specification

RatingAt least half the shaft wall's rating, 30 minutes minimum — FD30 typical
ClosingKept locked shut; self-closer not normally required
LockingFlush cylinder or budget lock, tested with the door
FinishFlush, painted or laminated to match the corridor
SignageFire door keep locked
Elevation drawing of riser & service cupboard doors

See the full specification and options for Riser & Service Cupboard Doors

What happens next

  1. Share your FRA or inspection findings
  2. We confirm every door on site
  3. Fixed quote, certified doorsets only
  4. Fitted to the manufacturer's instructions, with photos

Questions about riser cupboard fire doors in Tonypandy

Will I get certificates for the doors fitted in Tonypandy?

Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.

Which rules do riser cupboard fire doors in Tonypandy need to meet?

They are specified to Approved Document B (Wales) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.

Do you remove the old doors?

Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Tonypandy.

What rating does a riser door need?

In England, Approved Document B generally asks for at least half the fire resistance of the shaft wall, with a 30-minute minimum — so FD30 is typical, rising to FD60 for 120-minute shafts. Your fire strategy confirms it.

Also covering towns near Tonypandy

Also available in Tonypandy

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.