Our Stockton-on-Tees supply and fit service
We fit HMO fire doors and self-closers in Stockton-on-Tees and the rest of County Durham. The process is simple: we survey and measure each opening, propose a certified doorset for it, and give you a fixed price. Fitting is booked once the doorsets are made, usually with no door left out of action overnight.
Stockton-on-Tees is about 10 miles from Darlington. Wherever your building is in TS18, we arrange survey and fitting dates around access and occupancy.
Fire door rules in Stockton-on-Tees
Because Stockton-on-Tees is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
Guide prices in Stockton-on-Tees
Our guide for HMO fire doors is £750–£1,100 per door fitted, ex VAT. Quotes for Stockton-on-Tees are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Guide prices assume straightforward access; out-of-hours working or difficult access is priced as a separate, visible line.
Where HMO fire doors are used in Stockton-on-Tees
In Stockton-on-Tees, HMO fire doors are typically needed in bedsits and shared houses and student lets.
County Durham and the Tees side include former industrial towns, terraced housing, student accommodation in Durham and large public estates.
- Bedsits and shared houses
- Student lets
- Licensed HMOs
- House conversions
What you get with each doorset
| Typical rating | FD30 to rooms off the escape route; FD30S where licence conditions require |
|---|---|
| Closers | Overhead or concealed self-closers |
| Locks | Thumb-turn locking that opens from inside without a key |
| Guidance | Licence conditions and fire risk assessment; LACORS guidance in England |
| Finish | Paint-grade or pre-finished white |
See the full specification and options for HMO Fire Doors
Four steps to compliant doors
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Questions about HMO fire doors in Stockton-on-Tees
Will I get certificates for the doors fitted in Stockton-on-Tees?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Do you cover Stockton-on-Tees?
Yes. We survey, supply and fit HMO fire doors throughout Stockton-on-Tees and the rest of County Durham, including TS18 and nearby Billingham.
Is the survey in Stockton-on-Tees free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Do HMO fire doors need intumescent strips and smoke seals?
Fire doors always have intumescent seals. Some councils also require smoke seals in HMOs; your licence conditions will say.
Neighbouring areas
- Billingham (2 miles)
- Thornaby-on-Tees (2 miles)
- Middlesbrough (3 miles)
- Hartlepool (9 miles)
- Darlington (10 miles)
- Newton Aycliffe (11 miles)
Other products in Stockton-on-Tees
- Commercial & Office Fire Doors in Stockton-on-Tees
- Composite Fire Doors in Stockton-on-Tees
- FD30 Fire Doorsets in Stockton-on-Tees
- School & Healthcare Fire Doors in Stockton-on-Tees
- Flat Entrance Fire Doors in Stockton-on-Tees
- FD30S Smoke Control Doorsets in Stockton-on-Tees
- FD60 Fire Doorsets in Stockton-on-Tees
- Steel Fire Doors in Stockton-on-Tees
- HMO Fire Doors across County Durham
- All fire doors in Stockton-on-Tees