Certified commercial fire doors for Stockton-on-Tees
Looking for commercial fire doors in Stockton-on-Tees? Our supply and fit service covers TS18 and the surrounding area, including Billingham and Thornaby-on-Tees. We quote complete doorsets — leaf, frame, seals, hinges and closer — because that is what the fire certification actually covers.
Stockton-on-Tees is about 10 miles from Darlington. Wherever your building is in TS18, we arrange survey and fitting dates around access and occupancy.
Regulations for commercial fire doors in County Durham
In Stockton-on-Tees, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
Commercial fire doors prices in Stockton-on-Tees
Our guide price for commercial fire doors in Stockton-on-Tees is £850 to £1,500 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Where commercial fire doors are used in Stockton-on-Tees
Typical uses for commercial fire doors in Stockton-on-Tees include restaurants and commercial kitchens and retail units.
County Durham and the Tees side include former industrial towns, terraced housing, student accommodation in Durham and large public estates.
- Restaurants and commercial kitchens
- Retail units
- Hotels
- Office fit-outs
What you get with each doorset
| Rating | FD30 or FD30S typical; FD60 to cores and plant |
|---|---|
| Finishes | Oak, walnut or ash veneer, laminate, paint-grade |
| Access control | Electric locks and maglocks tested with the doorset |
| Glazing | Narrow or full vision panels |
| Compliance | Fire risk assessment under the fire safety law where the building is |
See the full specification and options for Commercial & Office Fire Doors
From enquiry to handover
- Tell us about the doors — photos help
- Free measure survey at your Stockton-on-Tees property
- Door-by-door schedule and fixed price
- Installation and handover pack
Common questions in County Durham
Is the survey in Stockton-on-Tees free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Stockton-on-Tees.
Can you work around tenants or staff in Stockton-on-Tees?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Can I add access control to my fire doors?
Yes, using hardware covered by the doorset's evidence. Retro-fitting untested components can void certification.
Nearby towns we cover
- Billingham (2 miles)
- Thornaby-on-Tees (2 miles)
- Middlesbrough (3 miles)
- Hartlepool (9 miles)
- Darlington (10 miles)
- Newton Aycliffe (11 miles)
Also available in Stockton-on-Tees
- Communal & Corridor Fire Doors in Stockton-on-Tees
- Stairwell & Escape Route Doors in Stockton-on-Tees
- Fire Door Replacement in Stockton-on-Tees
- Fire Doors for Homes in Stockton-on-Tees
- Timber Fire Doorsets in Stockton-on-Tees
- Steel Fire Doors in Stockton-on-Tees
- HMO Fire Doors in Stockton-on-Tees
- Composite Fire Doors in Stockton-on-Tees
- Commercial & Office Fire Doors across County Durham
- All fire doors in Stockton-on-Tees