Certified flat entrance fire doors for Stockton-on-Tees
Fire Rated Doors supplies and fits flat entrance fire doors in Stockton-on-Tees, County Durham. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.
Stockton-on-Tees is about 10 miles from Darlington; we cover both, along with Billingham, Thornaby-on-Tees and Middlesbrough.
Which rules apply in Stockton-on-Tees?
Fire doors in Stockton-on-Tees sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
What do flat entrance fire doors cost in Stockton-on-Tees?
Our guide price for flat entrance fire doors in Stockton-on-Tees is £1,250 to £2,300 per door including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.
Typical uses in Stockton-on-Tees
Typical uses for flat entrance fire doors in Stockton-on-Tees include student and build-to-rent blocks and converted buildings with shared stairs.
County Durham and the Tees side include former industrial towns, terraced housing, student accommodation in Durham and large public estates.
- Student and build-to-rent blocks
- Converted buildings with shared stairs
- Blocks of flats
- Supported housing
Doorset specification
| Fire & smoke | FD30S / E30 Sa as standard |
|---|---|
| Security | PAS 24:2022 options; Approved Document Q requires PAS 24 or equivalent for new dwellings in England |
| Hardware | Self-closer, multipoint or nightlatch, fire-rated spyhole and letterplate where tested |
| Materials | Timber, composite or steel-faced |
| Acoustic | Acoustic-rated options for noisy corridors |
See the full specification and options for Flat Entrance Fire Doors
How it works in Stockton-on-Tees
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
Questions about flat entrance fire doors in Stockton-on-Tees
Which rules do flat entrance fire doors in Stockton-on-Tees need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Stockton-on-Tees.
Do you cover Stockton-on-Tees?
Yes. We survey, supply and fit flat entrance fire doors throughout Stockton-on-Tees and the rest of County Durham, including TS18 and nearby Billingham.
Can I fit my own new front door to my flat?
Only with a doorset that meets the building's fire and smoke requirements, and usually with the freeholder's consent. A non-compliant replacement can put the whole building at risk.
Flat Entrance Fire Doors near Stockton-on-Tees
- Billingham (2 miles)
- Thornaby-on-Tees (2 miles)
- Middlesbrough (3 miles)
- Hartlepool (9 miles)
- Darlington (10 miles)
- Newton Aycliffe (11 miles)
Other fire doors in Stockton-on-Tees
- Fire Door Supply & Fit in Stockton-on-Tees
- FD60 Fire Doorsets in Stockton-on-Tees
- FD90 & FD120 Doorsets in Stockton-on-Tees
- Commercial & Office Fire Doors in Stockton-on-Tees
- Timber Fire Doorsets in Stockton-on-Tees
- Double & Leaf-and-a-Half Fire Doors in Stockton-on-Tees
- Fire Door Ironmongery & Closers in Stockton-on-Tees
- HMO Fire Doors in Stockton-on-Tees
- Flat Entrance Fire Doors across County Durham
- All fire doors in Stockton-on-Tees