Getting fire door closers and ironmongery fitted in Staines
Need fire door closers and ironmongery in Staines? We supply and fit complete certified doorsets across Surrey, starting with a free measure survey in and around TW18. Every quote lists each door, its rating and the manufacturer's certificate reference, so you know exactly what is going in before anything is ordered.
Staines is about 8 miles from Woking; we cover both, along with Egham, Ashford and Feltham.
What the law says in Staines
New and replacement fire doors in Staines are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
Guide prices in Staines
Guide prices for fire door closers and ironmongery in Staines run from about £120 to £500 per item, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Where fire door closers and ironmongery are needed
In Staines, fire door closers and ironmongery are typically needed in busy corridors needing hold-open and failed closers and hinges.
Surrey's commuter towns have many office-to-residential conversions and new apartment schemes, plus independent schools and care homes.
- Busy corridors needing hold-open
- Failed closers and hinges
- Seal and signage replacement
- Access control preparation
What you get with each doorset
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
Four steps to compliant doors
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Fire door closers and ironmongery in Staines: questions
Is the survey in Staines free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
What does a Staines quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Will I get certificates for the doors fitted in Staines?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
How many hinges does a fire door need?
Most timber fire doors need three hinges; heavier FD60 leaves often need four. The evidence decides.
Also covering towns near Staines
- Egham (2 miles)
- Ashford, Surrey (2 miles)
- Feltham (4 miles)
- Sunbury-on-Thames (4 miles)
- Walton-on-Thames (5 miles)
- Hanworth (6 miles)
Other fire doors in Staines
- Fire Exit Doors in Staines
- Commercial & Office Fire Doors in Staines
- Composite Fire Doors in Staines
- Glazed Fire Doors in Staines
- FD30 Fire Doorsets in Staines
- Double & Leaf-and-a-Half Fire Doors in Staines
- FD30S Smoke Control Doorsets in Staines
- Fire Door Supply & Fit in Staines
- Fire Door Ironmongery & Closers across Surrey
- All fire doors in Staines