Certified fire door closers and ironmongery for Egham
If your fire risk assessment in Egham has flagged doors to replace, we can schedule, quote and fit fire door closers, hinges and hold-open devices to match its recommendations. Surveys in TW20 are free and quotes are fixed and itemised.
We cover TW20 and the surrounding area, including Staines. Tell us your postcode and preferred dates and we'll confirm a survey slot.
What the law says in Egham
Because Egham is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
Cost of fire door closers and ironmongery in Surrey
Our guide for fire door closers and ironmongery is £120–£500 per item fitted, ex VAT. Quotes for Egham are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Buildings that need fire door closers and ironmongery
Busy corridors needing hold-open and seal and signage replacement are among the most common settings for fire door closers and ironmongery, in Egham as elsewhere.
Surrey's commuter towns have many office-to-residential conversions and new apartment schemes, plus independent schools and care homes.
- Busy corridors needing hold-open
- Seal and signage replacement
- Access control preparation
- Failed closers and hinges
Doorset specification
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
Four steps to compliant doors
- Tell us about the doors — photos help
- Free measure survey at your Egham property
- Door-by-door schedule and fixed price
- Installation and handover pack
Common questions in Surrey
Can you work around tenants or staff in Egham?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Do you cover Egham?
Yes. We survey, supply and fit fire door closers and ironmongery throughout Egham and the rest of Surrey, including TW20 and nearby Staines.
Which rules do fire door closers and ironmongery in Egham need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
How many hinges does a fire door need?
Most timber fire doors need three hinges; heavier FD60 leaves often need four. The evidence decides.
Also covering towns near Egham
- Staines (2 miles)
- Ashford, Surrey (4 miles)
- Windsor (4 miles)
- Slough (6 miles)
- Feltham (6 miles)
- Sunbury-on-Thames (6 miles)
Other products in Egham
- Fire-Rated Screens & Fanlights in Egham
- School & Healthcare Fire Doors in Egham
- Timber Fire Doorsets in Egham
- Flat Entrance Fire Doors in Egham
- FD30 Fire Doorsets in Egham
- Stairwell & Escape Route Doors in Egham
- Fire Exit Doors in Egham
- Composite Fire Doors in Egham
- Fire Door Ironmongery & Closers across Surrey
- All fire doors in Egham