Our Perth supply and fit service
For landlords, managing agents, businesses and homeowners in Perth, we provide fire door closers, hinges and hold-open devices with one fixed quote. A free survey comes first, then a door-by-door schedule, then installation to the manufacturer's instructions and a handover pack for your records.
We cover Perth and the rest of Perth & Kinross, with surveys arranged around your building's access and occupancy.
What the law says in Perth
In Perth the building standards come from the Scottish Technical Handbooks rather than Approved Document B, and existing non-domestic premises fall under the Fire (Scotland) Act 2005. We specify doorsets against the Scottish requirements and your fire risk assessment.
What do fire door closers and ironmongery cost in Perth?
Expect roughly £120–£500 per item for fire door closers and ironmongery, fitted, ex VAT. Your Perth quote is fixed after survey and itemised door by door.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Typical uses in Perth
Seal and signage replacement and busy corridors needing hold-open are among the most common settings for fire door closers and ironmongery, in Perth as elsewhere.
Perth and Kinross mixes Perth's city centre and offices with rural hotels, schools and care homes.
- Seal and signage replacement
- Busy corridors needing hold-open
- Access control preparation
- Failed closers and hinges
Doorset specification
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
Four steps to compliant doors
- Tell us about the doors — photos help
- Free measure survey at your Perth property
- Door-by-door schedule and fixed price
- Installation and handover pack
Common questions in Perth & Kinross
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Perth.
What does a Perth quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Do you work for landlords and managing agents in Perth?
Yes. We can schedule doors flat by flat, send quotes per property and invoice the managing agent or freeholder.
Can I use any hinge on a fire door?
No. Hinges should be CE/UKCA marked to BS EN 1935 and suitable for the door's weight and rating.
Nearby towns we cover
- Glenrothes (17 miles)
- Dundee (18 miles)
- Kirkcaldy (22 miles)
- Dunfermline (22 miles)
- Alloa (24 miles)
- Stirling (27 miles)
More doorsets for Perth
- Fire-Rated Screens & Fanlights in Perth
- Flat Entrance Fire Doors in Perth
- Security Fire Doors in Perth
- School & Healthcare Fire Doors in Perth
- Acoustic Fire Doors in Perth
- Fire Exit Doors in Perth
- FD30S Smoke Control Doorsets in Perth
- Commercial & Office Fire Doors in Perth
- Fire Door Ironmongery & Closers across Perth & Kinross
- All fire doors in Perth