Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
BS EN 1154BS EN 1935BS EN 1155

Fire Door Ironmongery & Closers in Dunfermline

We supply and fit fire door closers and ironmongery in Dunfermline (KY12) as complete certified doorsets — surveyed free, quoted door by door with each manufacturer's certificate reference, and fitted to the manufacturer's instructions.

From £120 per item in Dunfermline, supplied & fitted, ex VAT

Overhead door closer fitted to a white fire door and frame

Getting fire door closers and ironmongery fitted in Dunfermline

Looking for fire door closers and ironmongery in Dunfermline? Our supply and fit service covers KY12 and the surrounding area, including Livingston and Kirkcaldy. We quote complete doorsets — leaf, frame, seals, hinges and closer — because that is what the fire certification actually covers.

We cover Dunfermline and the rest of Fife, with surveys arranged around your building's access and occupancy.

Which rules apply in Dunfermline?

In Dunfermline the building standards come from the Scottish Technical Handbooks rather than Approved Document B, and existing non-domestic premises fall under the Fire (Scotland) Act 2005. We specify doorsets against the Scottish requirements and your fire risk assessment.

Cost of fire door closers and ironmongery in Fife

Our guide for fire door closers and ironmongery is £120–£500 per item fitted, ex VAT. Quotes for Dunfermline are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.

We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.

Where fire door closers and ironmongery are needed

In Dunfermline, fire door closers and ironmongery are typically needed in access control preparation and busy corridors needing hold-open.

Fife's main towns — Dunfermline, Kirkcaldy, Glenrothes — mix newer housing, industry and public buildings, with St Andrews adding student housing.

  • Access control preparation
  • Busy corridors needing hold-open
  • Failed closers and hinges
  • Seal and signage replacement

What's in the doorset

ClosersOverhead and concealed closers to BS EN 1154
HingesCE/UKCA-marked butt hinges to BS EN 1935
Hold-openElectromagnetic and free-swing devices to BS EN 1155
Locks & latchesTo BS EN 12209, tested with the doorset
Seals & signsIntumescent and smoke seals; mandatory fire door signage
Elevation drawing of fire door ironmongery & closers

See the full specification and options for Fire Door Ironmongery & Closers

From enquiry to handover

  1. Send your postcode, door count and any fire risk assessment notes
  2. We survey and measure each opening for free
  3. You get a fixed, itemised quote with certificate references
  4. We fit, test operation and hand over the paperwork

Fire door closers and ironmongery in Dunfermline: questions

Do you remove the old doors?

Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Dunfermline.

Can you work around tenants or staff in Dunfermline?

Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.

What does a Dunfermline quote include?

Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.

What closer strength does a fire door need?

Enough to close and latch the door reliably — often EN3 or EN4 for standard leaves — while keeping opening force within accessibility limits.

Fire Door Ironmongery & Closers near Dunfermline

Other fire doors in Dunfermline

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.