Our Alloa supply and fit service
Looking for fire door closers and ironmongery in Alloa? Our supply and fit service covers FK10 and the surrounding area, including Stirling and Falkirk. We quote complete doorsets — leaf, frame, seals, hinges and closer — because that is what the fire certification actually covers.
Our Forth Valley coverage includes Alloa and its neighbours Stirling, Falkirk and Dunfermline; tell us your postcode and preferred dates and we'll confirm a survey slot.
What the law says in Alloa
Scotland has its own system: new and replacement fire doors in Alloa are designed to the Building (Scotland) Regulations 2004 and the Technical Handbooks (Section 2, Fire). For non-domestic premises, the Fire (Scotland) Act 2005 and the Fire Safety (Scotland) Regulations 2006 place duties on whoever controls the building.
What do fire door closers and ironmongery cost in Alloa?
Our guide for fire door closers and ironmongery is £120–£500 per item fitted, ex VAT. Quotes for Alloa are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.
Where fire door closers and ironmongery are needed
Wherever they are in Alloa, fire door closers and ironmongery are most often specified for access control preparation and busy corridors needing hold-open.
Forth Valley combines Stirling's university and historic centre with Falkirk's industry and Alloa's town centre.
- Access control preparation
- Busy corridors needing hold-open
- Failed closers and hinges
- Seal and signage replacement
Doorset specification
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
Four steps to compliant doors
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
Your questions answered
How quickly can you survey in Alloa?
We arrange surveys around your access needs and, where possible, combine Alloa visits with other work in Forth Valley. Tell us your preferred dates when you enquire.
Is the survey in Alloa free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Will I get certificates for the doors fitted in Alloa?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
What closer strength does a fire door need?
Enough to close and latch the door reliably — often EN3 or EN4 for standard leaves — while keeping opening force within accessibility limits.
Neighbouring areas
- Stirling (6 miles)
- Falkirk (8 miles)
- Dunfermline (13 miles)
- Cumbernauld (14 miles)
- Bathgate (16 miles)
- Livingston (18 miles)
More doorsets for Alloa
- Composite Fire Doors in Alloa
- FD30S Smoke Control Doorsets in Alloa
- HMO Fire Doors in Alloa
- Security Fire Doors in Alloa
- Communal & Corridor Fire Doors in Alloa
- FD30 Fire Doorsets in Alloa
- Fire-Rated Screens & Fanlights in Alloa
- Commercial & Office Fire Doors in Alloa
- Fire Door Ironmongery & Closers across Forth Valley
- All fire doors in Alloa