Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD30 / FD60Access controlVeneered

Commercial & Office Fire Doors in Bury

We supply and fit commercial fire doors in Bury (BL9) as complete certified doorsets — surveyed free, quoted door by door with each manufacturer's certificate reference, and fitted to the manufacturer's instructions.

From £850 per single doorset in Bury, supplied & fitted, ex VAT

Oak-veneered fire door with narrow vision panel in an office corridor

Our Bury supply and fit service

Getting commercial fire doors right in Bury means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.

We cover BL9 and the surrounding area, including Radcliffe. Tell us your postcode and preferred dates and we'll confirm a survey slot.

Regulations for commercial fire doors in Greater Manchester

New and replacement fire doors in Bury are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.

Guide prices in Bury

Expect roughly £850–£1,500 per single doorset for commercial fire doors, fitted, ex VAT. Your Bury quote is fixed after survey and itemised door by door.

Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.

Where commercial fire doors are used in Bury

In Bury, commercial fire doors are typically needed in office fit-outs and retail units.

Greater Manchester combines city-centre apartment towers in Manchester and Salford with converted mills, large post-war estates and busy town centres across the boroughs.

  • Office fit-outs
  • Retail units
  • Restaurants and commercial kitchens
  • Hotels

What's in the doorset

RatingFD30 or FD30S typical; FD60 to cores and plant
FinishesOak, walnut or ash veneer, laminate, paint-grade
Access controlElectric locks and maglocks tested with the doorset
GlazingNarrow or full vision panels
ComplianceFire risk assessment under the fire safety law where the building is
Elevation drawing of commercial & office fire doors

See the full specification and options for Commercial & Office Fire Doors

Four steps to compliant doors

  1. Send your postcode, door count and any fire risk assessment notes
  2. We survey and measure each opening for free
  3. You get a fixed, itemised quote with certificate references
  4. We fit, test operation and hand over the paperwork

Common questions in Greater Manchester

Can you work around tenants or staff in Bury?

Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.

What does a Bury quote include?

Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.

Do you remove the old doors?

Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Bury.

Do office fire doors need vision panels?

Doors across corridors and doors that swing into circulation routes usually should, for safety and accessibility.

Nearby towns we cover

More doorsets for Bury

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.