Getting FD60 fire doors fitted in Bury
If your fire risk assessment in Bury has flagged doors to replace, we can schedule, quote and fit FD60 doorsets for compartment walls, cores and plant rooms to match its recommendations. Surveys in BL9 are free and quotes are fixed and itemised.
Bury is about 9 miles from Manchester. Wherever your building is in BL9, we arrange survey and fitting dates around access and occupancy.
What the law says in Bury
Fire doors in Bury sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
What do FD60 fire doors cost in Bury?
Our guide price for FD60 fire doors in Bury is £1,050 to £1,650 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
If your fire risk assessment lists specific doors, send it with your enquiry and we'll price exactly those openings.
Buildings that need FD60 fire doors
In Bury, FD60 fire doors are typically needed in compartment walls and plant and boiler rooms.
Greater Manchester combines city-centre apartment towers in Manchester and Salford with converted mills, large post-war estates and busy town centres across the boroughs.
- Compartment walls
- Plant and boiler rooms
- Higher-risk stores
- Stair cores in taller blocks
What you get with each doorset
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
Four steps to compliant doors
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Common questions in Greater Manchester
Can you fit just one door in Bury?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Greater Manchester.
What does a Bury quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Is the survey in Bury free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Can I use an FD60 door where FD30 is required?
Yes — a higher rating meets a lower requirement — but it is heavier and dearer, so we only recommend it where the location calls for it or you want a margin.
Also covering towns near Bury
- Radcliffe (3 miles)
- Heywood (3 miles)
- Whitefield (4 miles)
- Prestwich (4 miles)
- Middleton (6 miles)
- Farnworth (6 miles)
Other products in Bury
- Fire Door Replacement in Bury
- Acoustic Fire Doors in Bury
- Communal & Corridor Fire Doors in Bury
- Flat Entrance Fire Doors in Bury
- Fire Door Ironmongery & Closers in Bury
- FD30S Smoke Control Doorsets in Bury
- Glazed Fire Doors in Bury
- Fire Exit Doors in Bury
- FD60 Fire Doorsets across Greater Manchester
- All fire doors in Bury