Getting fire door closers and ironmongery fitted in Morden
Getting fire door closers and ironmongery right in Morden means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.
We cover SM4 and the surrounding area, including Mitcham. Tell us your postcode and preferred dates and we'll confirm a survey slot.
Regulations for fire door closers and ironmongery in Greater London
In Morden, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
What do fire door closers and ironmongery cost in Morden?
Our guide price for fire door closers and ironmongery in Morden is £120 to £500 per item including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Buildings that need fire door closers and ironmongery
Failed closers and hinges and seal and signage replacement are among the most common settings for fire door closers and ironmongery, in Morden as elsewhere.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- Failed closers and hinges
- Seal and signage replacement
- Busy corridors needing hold-open
- Access control preparation
What you get with each doorset
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
Four steps to compliant doors
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Common questions in Greater London
Will I get certificates for the doors fitted in Morden?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Which rules do fire door closers and ironmongery in Morden need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
What does a Morden quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
How many hinges does a fire door need?
Most timber fire doors need three hinges; heavier FD60 leaves often need four. The evidence decides.
Also covering towns near Morden
- Mitcham (1 mile)
- Wimbledon (2 miles)
- Carshalton (2 miles)
- New Malden (2 miles)
- Wallington (3 miles)
- Sutton (3 miles)
Other products in Morden
- FD90 & FD120 Doorsets in Morden
- Communal & Corridor Fire Doors in Morden
- Fire Doors for Homes in Morden
- Acoustic Fire Doors in Morden
- Double & Leaf-and-a-Half Fire Doors in Morden
- Riser & Service Cupboard Doors in Morden
- Fire Door Replacement in Morden
- Flat Entrance Fire Doors in Morden
- Fire Door Ironmongery & Closers across Greater London
- All fire doors in Morden