Fire Door Ironmongery & Closers for Ewell buildings
We fit fire door closers, hinges and hold-open devices in Ewell and the rest of Surrey. The process is simple: we survey and measure each opening, propose a certified doorset for it, and give you a fixed price. Fitting is booked once the doorsets are made, usually with no door left out of action overnight.
Ewell is about 14 miles from Woking. Wherever your building is in KT17, we arrange survey and fitting dates around access and occupancy.
Fire door rules in Ewell
In Ewell, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
What do fire door closers and ironmongery cost in Ewell?
Our guide for fire door closers and ironmongery is £120–£500 per item fitted, ex VAT. Quotes for Ewell are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.
Where fire door closers and ironmongery are used in Ewell
In Ewell, fire door closers and ironmongery are typically needed in failed closers and hinges and busy corridors needing hold-open.
Surrey's commuter towns have many office-to-residential conversions and new apartment schemes, plus independent schools and care homes.
- Failed closers and hinges
- Busy corridors needing hold-open
- Access control preparation
- Seal and signage replacement
What's in the doorset
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
From enquiry to handover
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Questions about fire door closers and ironmongery in Ewell
Can you work around tenants or staff in Ewell?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Will I get certificates for the doors fitted in Ewell?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
How quickly can you survey in Ewell?
We arrange surveys around your access needs and, where possible, combine Ewell visits with other work in Surrey. Tell us your preferred dates when you enquire.
What closer strength does a fire door need?
Enough to close and latch the door reliably — often EN3 or EN4 for standard leaves — while keeping opening force within accessibility limits.
Neighbouring areas
- Epsom (2 miles)
- Sutton (2 miles)
- Banstead (2 miles)
- New Malden (4 miles)
- Surbiton (4 miles)
- Carshalton (4 miles)
Other products in Ewell
- Composite Fire Doors in Ewell
- FD60 Fire Doorsets in Ewell
- School & Healthcare Fire Doors in Ewell
- Fire Doors for Homes in Ewell
- Double & Leaf-and-a-Half Fire Doors in Ewell
- FD30S Smoke Control Doorsets in Ewell
- FD30 Fire Doorsets in Ewell
- Riser & Service Cupboard Doors in Ewell
- Fire Door Ironmongery & Closers across Surrey
- All fire doors in Ewell