Fire Door Ironmongery & Closers for Sutton buildings
We cover Sutton and nearby Carshalton for fire door closers and ironmongery, with surveys booked around your building's access and occupancy. Each door is quoted individually, so you can see what every opening costs and why.
We cover SM2 and the surrounding area, including Carshalton. Tell us your postcode and preferred dates and we'll confirm a survey slot.
Regulations for fire door closers and ironmongery in Greater London
Fire doors in Sutton sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
Guide prices in Sutton
Guide prices for fire door closers and ironmongery in Sutton run from about £120 to £500 per item, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.
Where fire door closers and ironmongery are needed
Typical uses for fire door closers and ironmongery in Sutton include busy corridors needing hold-open and access control preparation.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- Busy corridors needing hold-open
- Access control preparation
- Failed closers and hinges
- Seal and signage replacement
What you get with each doorset
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
How it works in Sutton
- Tell us about the doors — photos help
- Free measure survey at your Sutton property
- Door-by-door schedule and fixed price
- Installation and handover pack
Common questions in Greater London
Will I get certificates for the doors fitted in Sutton?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Can you fit just one door in Sutton?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Greater London.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Sutton.
Can I use any hinge on a fire door?
No. Hinges should be CE/UKCA marked to BS EN 1935 and suitable for the door's weight and rating.
Also covering towns near Sutton
- Carshalton (2 miles)
- Banstead (2 miles)
- Ewell (2 miles)
- Wallington (2 miles)
- Coulsdon (3 miles)
- Epsom (3 miles)
More doorsets for Sutton
- FD90 & FD120 Doorsets in Sutton
- Fire Doors for Homes in Sutton
- HMO Fire Doors in Sutton
- School & Healthcare Fire Doors in Sutton
- Composite Fire Doors in Sutton
- Glazed Fire Doors in Sutton
- Commercial & Office Fire Doors in Sutton
- Fire Door Replacement in Sutton
- Fire Door Ironmongery & Closers across Greater London
- All fire doors in Sutton