Getting fire door closers and ironmongery fitted in Bexley
Looking for fire door closers and ironmongery in Bexley? Our supply and fit service covers DA5 and the surrounding area, including Welling and Dartford. We quote complete doorsets — leaf, frame, seals, hinges and closer — because that is what the fire certification actually covers.
We cover DA5 and the surrounding area, including Welling. Tell us your postcode and preferred dates and we'll confirm a survey slot.
Fire door rules in Bexley
In Bexley, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
What do fire door closers and ironmongery cost in Bexley?
Our guide for fire door closers and ironmongery is £120–£500 per item fitted, ex VAT. Quotes for Bexley are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Where fire door closers and ironmongery are used in Bexley
Seal and signage replacement and busy corridors needing hold-open are among the most common settings for fire door closers and ironmongery, in Bexley as elsewhere.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- Seal and signage replacement
- Busy corridors needing hold-open
- Access control preparation
- Failed closers and hinges
Doorset specification
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
What happens next
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Common questions in Greater London
What does a Bexley quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Do you work for landlords and managing agents in Bexley?
Yes. We can schedule doors flat by flat, send quotes per property and invoice the managing agent or freeholder.
Is the survey in Bexley free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Can I use any hinge on a fire door?
No. Hinges should be CE/UKCA marked to BS EN 1935 and suitable for the door's weight and rating.
Also covering towns near Bexley
- Welling (2 miles)
- Dartford (3 miles)
- Swanley (3 miles)
- Eltham (4 miles)
- Thamesmead (4 miles)
- Blackheath (6 miles)
Other products in Bexley
- Steel Fire Doors in Bexley
- Fire-Rated Screens & Fanlights in Bexley
- Stairwell & Escape Route Doors in Bexley
- Fire Doors for Homes in Bexley
- Composite Fire Doors in Bexley
- FD30S Smoke Control Doorsets in Bexley
- Commercial & Office Fire Doors in Bexley
- Glazed Fire Doors in Bexley
- Fire Door Ironmongery & Closers across Greater London
- All fire doors in Bexley