Our Edmonton supply and fit service
If your fire risk assessment in Edmonton has flagged doors to replace, we can schedule, quote and fit fire door closers, hinges and hold-open devices to match its recommendations. Surveys in N9 are free and quotes are fixed and itemised.
We cover N9 and the surrounding area, including Tottenham. Tell us your postcode and preferred dates and we'll confirm a survey slot.
Regulations for fire door closers and ironmongery in Greater London
Fire doors in Edmonton sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
Fire door closers and ironmongery prices in Edmonton
Guide prices for fire door closers and ironmongery in Edmonton run from about £120 to £500 per item, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.
Typical uses in Edmonton
Wherever they are in Edmonton, fire door closers and ironmongery are most often specified for seal and signage replacement and failed closers and hinges.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- Seal and signage replacement
- Failed closers and hinges
- Busy corridors needing hold-open
- Access control preparation
What's in the doorset
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
From enquiry to handover
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Fire door closers and ironmongery in Edmonton: questions
How quickly can you survey in Edmonton?
We arrange surveys around your access needs and, where possible, combine Edmonton visits with other work in Greater London. Tell us your preferred dates when you enquire.
Will I get certificates for the doors fitted in Edmonton?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Can you fit just one door in Edmonton?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Greater London.
How many hinges does a fire door need?
Most timber fire doors need three hinges; heavier FD60 leaves often need four. The evidence decides.
Also covering towns near Edmonton
- Tottenham (2 miles)
- Enfield (2 miles)
- Chingford (2 miles)
- Walthamstow (3 miles)
- Wood Green (3 miles)
- Woodford Green (4 miles)
Other products in Edmonton
- Stairwell & Escape Route Doors in Edmonton
- FD90 & FD120 Doorsets in Edmonton
- Acoustic Fire Doors in Edmonton
- FD60 Fire Doorsets in Edmonton
- Commercial & Office Fire Doors in Edmonton
- Steel Fire Doors in Edmonton
- Fire-Rated Screens & Fanlights in Edmonton
- FD30S Smoke Control Doorsets in Edmonton
- Fire Door Ironmongery & Closers across Greater London
- All fire doors in Edmonton