Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD30SE30 SaSmoke seals

FD30S Smoke Control Doorsets in Edmonton

We supply and fit FD30S fire doors in Edmonton (N9) as complete certified doorsets — surveyed free, quoted door by door with each manufacturer's certificate reference, and fitted to the manufacturer's instructions.

From £800 per single doorset in Edmonton, supplied & fitted, ex VAT

Close-up of an intumescent strip and brush smoke seal set into a fire door frame

FD30S Smoke Control Doorsets for Edmonton buildings

If your fire risk assessment in Edmonton has flagged doors to replace, we can schedule, quote and fit FD30S smoke control doorsets for flats, stairs and corridors to match its recommendations. Surveys in N9 are free and quotes are fixed and itemised.

Whether your building is in central Edmonton or on its edges towards Tottenham, survey and fitting dates are arranged around your access needs, with occupied buildings worked in planned phases.

Regulations for FD30S fire doors in Greater London

In Edmonton, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.

What do FD30S fire doors cost in Edmonton?

Budget around £800 to £1,250 per single doorset for FD30S fire doors supplied and fitted in Edmonton, excluding VAT. We price each opening separately so nothing is hidden in a lump sum.

Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.

The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.

Buildings that need FD30S fire doors

In Edmonton, FD30S fire doors are typically needed in cross-corridor doors and protected stairways.

London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.

  • Cross-corridor doors
  • Protected stairways
  • Lobby doors in blocks of flats
  • Integral garage doors

Doorset specification

Fire resistance30 minutes (FD30 / E30)
Smoke controlTested to BS 476-31.1 or BS EN 1634-3 (Sa)
SealsCombined intumescent and brush or blade smoke seal
Typical useFlat entrances, protected stairs, corridor doors
CloserOverhead or concealed closer to BS EN 1154
Elevation drawing of fd30s smoke control doorsets

See the full specification and options for FD30S Smoke Control Doorsets

What happens next

  1. Share your FRA or inspection findings
  2. We confirm every door on site
  3. Fixed quote, certified doorsets only
  4. Fitted to the manufacturer's instructions, with photos

FD30S fire doors in Edmonton: questions

Will I get certificates for the doors fitted in Edmonton?

Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.

Can you work around tenants or staff in Edmonton?

Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.

Do you remove the old doors?

Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Edmonton.

Which doors in a block of flats need FD30S?

Typically flat entrance doors and doors onto protected stairs and lobbies. The building's fire strategy is the final word.

Neighbouring areas

More doorsets for Edmonton

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.