Our Camden Town supply and fit service
Looking for fire door closers and ironmongery in Camden Town? Our supply and fit service covers NW1 and the surrounding area, including Chalk Farm and Holloway. We quote complete doorsets — leaf, frame, seals, hinges and closer — because that is what the fire certification actually covers.
Camden Town is about 2 miles from London. Wherever your building is in NW1, we arrange survey and fitting dates around access and occupancy.
What the law says in Camden Town
New and replacement fire doors in Camden Town are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
Fire door closers and ironmongery prices in Camden Town
Guide prices for fire door closers and ironmongery in Camden Town run from about £120 to £500 per item, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.
Buildings that need fire door closers and ironmongery
Wherever they are in Camden Town, fire door closers and ironmongery are most often specified for busy corridors needing hold-open and access control preparation.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- Busy corridors needing hold-open
- Access control preparation
- Failed closers and hinges
- Seal and signage replacement
What you get with each doorset
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
Four steps to compliant doors
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Your questions answered
Is the survey in Camden Town free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Can you fit just one door in Camden Town?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Greater London.
Can you work around tenants or staff in Camden Town?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Can I use any hinge on a fire door?
No. Hinges should be CE/UKCA marked to BS EN 1935 and suitable for the door's weight and rating.
Also covering towns near Camden Town
- Chalk Farm (1 mile)
- Holloway (1 mile)
- Islington (2 miles)
- Archway (2 miles)
- Highbury (2 miles)
- Kilburn (2 miles)
Also available in Camden Town
- Fire Exit Doors in Camden Town
- FD90 & FD120 Doorsets in Camden Town
- FD60 Fire Doorsets in Camden Town
- Double & Leaf-and-a-Half Fire Doors in Camden Town
- Fire Doors for Homes in Camden Town
- Glazed Fire Doors in Camden Town
- Security Fire Doors in Camden Town
- Communal & Corridor Fire Doors in Camden Town
- Fire Door Ironmongery & Closers across Greater London
- All fire doors in Camden Town