Fire door closers and ironmongery in Archway: how we work
Looking for fire door closers and ironmongery in Archway? Our supply and fit service covers N19 and the surrounding area, including Holloway and Muswell Hill. We quote complete doorsets — leaf, frame, seals, hinges and closer — because that is what the fire certification actually covers.
Where possible we combine Archway surveys with other visits in Greater London, such as Holloway and Muswell Hill, which helps keep survey dates flexible.
What the law says in Archway
New and replacement fire doors in Archway are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
What do fire door closers and ironmongery cost in Archway?
Expect roughly £120–£500 per item for fire door closers and ironmongery, fitted, ex VAT. Your Archway quote is fixed after survey and itemised door by door.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
If your fire risk assessment lists specific doors, send it with your enquiry and we'll price exactly those openings.
Typical uses in Archway
In Archway, fire door closers and ironmongery are typically needed in failed closers and hinges and access control preparation.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- Failed closers and hinges
- Access control preparation
- Busy corridors needing hold-open
- Seal and signage replacement
Doorset specification
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
Four steps to compliant doors
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Questions about fire door closers and ironmongery in Archway
Will I get certificates for the doors fitted in Archway?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Can you work around tenants or staff in Archway?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
What does a Archway quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
How many hinges does a fire door need?
Most timber fire doors need three hinges; heavier FD60 leaves often need four. The evidence decides.
Also covering towns near Archway
- Holloway (1 mile)
- Muswell Hill (2 miles)
- Chalk Farm (2 miles)
- Camden Town (2 miles)
- Highbury (2 miles)
- Wood Green (2 miles)
Other products in Archway
- Fire Door Supply & Fit in Archway
- Double & Leaf-and-a-Half Fire Doors in Archway
- Riser & Service Cupboard Doors in Archway
- Flat Entrance Fire Doors in Archway
- Timber Fire Doorsets in Archway
- Commercial & Office Fire Doors in Archway
- Steel Fire Doors in Archway
- Stairwell & Escape Route Doors in Archway
- Fire Door Ironmongery & Closers across Greater London
- All fire doors in Archway