Fire Door Ironmongery & Closers for Ilkeston buildings
Fire Rated Doors supplies and fits fire door closers and ironmongery in Ilkeston, Derbyshire. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.
Ilkeston is about 7 miles from Derby; we cover both, along with Heanor, Long Eaton and Ripley.
Which rules apply in Ilkeston?
New and replacement fire doors in Ilkeston are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
Cost of fire door closers and ironmongery in Derbyshire
Budget around £120 to £500 per item for fire door closers and ironmongery supplied and fitted in Ilkeston, excluding VAT. We price each opening separately so nothing is hidden in a lump sum.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Typical uses in Ilkeston
Wherever they are in Ilkeston, fire door closers and ironmongery are most often specified for failed closers and hinges and busy corridors needing hold-open.
Derbyshire combines Derby's industrial and city-centre buildings with market towns, mill conversions and rural care settings.
- Failed closers and hinges
- Busy corridors needing hold-open
- Seal and signage replacement
- Access control preparation
What's in the doorset
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
What happens next
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Your questions answered
Will I get certificates for the doors fitted in Ilkeston?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
How quickly can you survey in Ilkeston?
We arrange surveys around your access needs and, where possible, combine Ilkeston visits with other work in Derbyshire. Tell us your preferred dates when you enquire.
Is the survey in Ilkeston free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
How many hinges does a fire door need?
Most timber fire doors need three hinges; heavier FD60 leaves often need four. The evidence decides.
Fire Door Ironmongery & Closers near Ilkeston
- Heanor (4 miles)
- Long Eaton (5 miles)
- Ripley (6 miles)
- Hucknall (6 miles)
- Nottingham (7 miles)
- Arnold (7 miles)
Other fire doors in Ilkeston
- FD60 Fire Doorsets in Ilkeston
- FD90 & FD120 Doorsets in Ilkeston
- Riser & Service Cupboard Doors in Ilkeston
- Stairwell & Escape Route Doors in Ilkeston
- Fire-Rated Screens & Fanlights in Ilkeston
- Flat Entrance Fire Doors in Ilkeston
- Fire Doors for Homes in Ilkeston
- Composite Fire Doors in Ilkeston
- Fire Door Ironmongery & Closers across Derbyshire
- All fire doors in Ilkeston