Our Ilkeston supply and fit service
Getting FD90 and FD120 fire doors right in Ilkeston means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.
Whether your building is in central Ilkeston or on its edges towards Heanor, survey and fitting dates are arranged around your access needs, with occupied buildings worked in planned phases.
Fire door rules in Ilkeston
In Ilkeston, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
What do FD90 and FD120 fire doors cost in Ilkeston?
Our guide for FD90 and FD120 fire doors is £1,900–£3,800 per single doorset fitted, ex VAT. Quotes for Ilkeston are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.
Where FD90 and FD120 fire doors are used in Ilkeston
Wherever they are in Ilkeston, FD90 and FD120 fire doors are most often specified for separating walls with long ratings and transformer and switch rooms.
Derbyshire combines Derby's industrial and city-centre buildings with market towns, mill conversions and rural care settings.
- Separating walls with long ratings
- Transformer and switch rooms
- Generator rooms
- High fire-load stores
What's in the doorset
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
From enquiry to handover
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Common questions in Derbyshire
Is the survey in Ilkeston free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Can you work around tenants or staff in Ilkeston?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Ilkeston.
Do these doors need panic hardware?
Only where they are on an escape route and the fire strategy calls for it. Panic hardware must be tested with the doorset.
Neighbouring areas
- Heanor (4 miles)
- Long Eaton (5 miles)
- Ripley (6 miles)
- Hucknall (6 miles)
- Nottingham (7 miles)
- Arnold (7 miles)
Also available in Ilkeston
- Glazed Fire Doors in Ilkeston
- Double & Leaf-and-a-Half Fire Doors in Ilkeston
- Commercial & Office Fire Doors in Ilkeston
- Steel Fire Doors in Ilkeston
- Fire Doors for Homes in Ilkeston
- HMO Fire Doors in Ilkeston
- FD30 Fire Doorsets in Ilkeston
- FD60 Fire Doorsets in Ilkeston
- FD90 & FD120 Doorsets across Derbyshire
- All fire doors in Ilkeston