Fire Door Ironmongery & Closers for Long Eaton buildings
Fire Rated Doors supplies and fits fire door closers and ironmongery in Long Eaton, Derbyshire. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.
Long Eaton is about 9 miles from Derby. Wherever your building is in NG10, we arrange survey and fitting dates around access and occupancy.
Fire door rules in Long Eaton
Because Long Eaton is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
Cost of fire door closers and ironmongery in Derbyshire
Our guide for fire door closers and ironmongery is £120–£500 per item fitted, ex VAT. Quotes for Long Eaton are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Guide prices assume straightforward access; out-of-hours working or difficult access is priced as a separate, visible line.
Where fire door closers and ironmongery are used in Long Eaton
Access control preparation and busy corridors needing hold-open are among the most common settings for fire door closers and ironmongery, in Long Eaton as elsewhere.
Derbyshire combines Derby's industrial and city-centre buildings with market towns, mill conversions and rural care settings.
- Access control preparation
- Busy corridors needing hold-open
- Seal and signage replacement
- Failed closers and hinges
Doorset specification
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
How it works in Long Eaton
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Your questions answered
Do you work for landlords and managing agents in Long Eaton?
Yes. We can schedule doors flat by flat, send quotes per property and invoice the managing agent or freeholder.
Do you cover Long Eaton?
Yes. We survey, supply and fit fire door closers and ironmongery throughout Long Eaton and the rest of Derbyshire, including NG10 and nearby Ilkeston.
Can you fit just one door in Long Eaton?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Derbyshire.
What closer strength does a fire door need?
Enough to close and latch the door reliably — often EN3 or EN4 for standard leaves — while keeping opening force within accessibility limits.
Nearby towns we cover
- Ilkeston (5 miles)
- Nottingham (6 miles)
- West Bridgford (6 miles)
- Heanor (9 miles)
- Derby (9 miles)
- Arnold (9 miles)
Also available in Long Eaton
- Communal & Corridor Fire Doors in Long Eaton
- School & Healthcare Fire Doors in Long Eaton
- FD60 Fire Doorsets in Long Eaton
- Stairwell & Escape Route Doors in Long Eaton
- Acoustic Fire Doors in Long Eaton
- Fire-Rated Screens & Fanlights in Long Eaton
- FD30 Fire Doorsets in Long Eaton
- FD30S Smoke Control Doorsets in Long Eaton
- Fire Door Ironmongery & Closers across Derbyshire
- All fire doors in Long Eaton