Certified FD90 and FD120 fire doors for Stratford-upon-Avon
Looking for FD90 and FD120 fire doors in Stratford-upon-Avon? Our supply and fit service covers CV37 and the surrounding area, including Warwick and Leamington Spa. We quote complete doorsets — leaf, frame, seals, hinges and closer — because that is what the fire certification actually covers.
Stratford-upon-Avon is about 25 miles from Nuneaton; we cover both, along with Warwick, Leamington Spa and Kenilworth.
What the law says in Stratford-upon-Avon
Fire doors in Stratford-upon-Avon sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
FD90 and FD120 fire doors prices in Stratford-upon-Avon
Our guide for FD90 and FD120 fire doors is £1,900–£3,800 per single doorset fitted, ex VAT. Quotes for Stratford-upon-Avon are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Where FD90 and FD120 fire doors are needed
Wherever they are in Stratford-upon-Avon, FD90 and FD120 fire doors are most often specified for high fire-load stores and generator rooms.
Warwickshire mixes Nuneaton and Rugby's logistics and new estates with Leamington and Stratford's period conversions and hotels.
- High fire-load stores
- Generator rooms
- Separating walls with long ratings
- Transformer and switch rooms
What you get with each doorset
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
From enquiry to handover
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
FD90 and FD120 fire doors in Stratford-upon-Avon: questions
Do you cover Stratford-upon-Avon?
Yes. We survey, supply and fit FD90 and FD120 fire doors throughout Stratford-upon-Avon and the rest of Warwickshire, including CV37 and nearby Warwick.
What does a Stratford-upon-Avon quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Which rules do FD90 and FD120 fire doors in Stratford-upon-Avon need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Do these doors need panic hardware?
Only where they are on an escape route and the fire strategy calls for it. Panic hardware must be tested with the doorset.
Also covering towns near Stratford-upon-Avon
- Warwick (8 miles)
- Leamington Spa (10 miles)
- Kenilworth (12 miles)
- Evesham (12 miles)
- Redditch (13 miles)
- Solihull (16 miles)
Other fire doors in Stratford-upon-Avon
- FD30 Fire Doorsets in Stratford-upon-Avon
- Glazed Fire Doors in Stratford-upon-Avon
- Fire Doors for Homes in Stratford-upon-Avon
- Commercial & Office Fire Doors in Stratford-upon-Avon
- School & Healthcare Fire Doors in Stratford-upon-Avon
- Composite Fire Doors in Stratford-upon-Avon
- Flat Entrance Fire Doors in Stratford-upon-Avon
- FD30S Smoke Control Doorsets in Stratford-upon-Avon
- FD90 & FD120 Doorsets across Warwickshire
- All fire doors in Stratford-upon-Avon