Getting FD90 and FD120 fire doors fitted in Portishead
We fit FD90 and FD120 steel doorsets for plant and high-risk rooms in Portishead and the rest of Somerset. The process is simple: we survey and measure each opening, propose a certified doorset for it, and give you a fixed price. Fitting is booked once the doorsets are made, usually with no door left out of action overnight.
We cover BS20 and the surrounding area, including Nailsea. Tell us your postcode and preferred dates and we'll confirm a survey slot.
Which rules apply in Portishead?
In Portishead, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
What do FD90 and FD120 fire doors cost in Portishead?
Our guide price for FD90 and FD120 fire doors in Portishead is £1,900 to £3,800 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.
Where FD90 and FD120 fire doors are needed
High fire-load stores and separating walls with long ratings are among the most common settings for FD90 and FD120 fire doors, in Portishead as elsewhere.
Somerset includes Bath's Georgian conversions and student housing, Weston-super-Mare's hotels and Taunton and Yeovil's town centres.
- High fire-load stores
- Separating walls with long ratings
- Generator rooms
- Transformer and switch rooms
What you get with each doorset
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
How it works in Portishead
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Common questions in Somerset
What does a Portishead quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Will I get certificates for the doors fitted in Portishead?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Can you work around tenants or staff in Portishead?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Are FD120 doors always steel?
Most are, though some specialist timber and composite systems hold longer ratings. The evidence for the exact configuration is what counts.
FD90 & FD120 Doorsets near Portishead
- Nailsea (4 miles)
- Clevedon (5 miles)
- Bristol (7 miles)
- Kingswood (11 miles)
- Mangotsfield (11 miles)
- Newport, Gwent (12 miles)
Also available in Portishead
- Stairwell & Escape Route Doors in Portishead
- Fire Door Replacement in Portishead
- Fire Door Supply & Fit in Portishead
- Composite Fire Doors in Portishead
- Double & Leaf-and-a-Half Fire Doors in Portishead
- FD30S Smoke Control Doorsets in Portishead
- Fire Door Ironmongery & Closers in Portishead
- Glazed Fire Doors in Portishead
- FD90 & FD120 Doorsets across Somerset
- All fire doors in Portishead