Certified FD90 and FD120 fire doors for Clevedon
We fit FD90 and FD120 steel doorsets for plant and high-risk rooms in Clevedon and the rest of Somerset. The process is simple: we survey and measure each opening, propose a certified doorset for it, and give you a fixed price. Fitting is booked once the doorsets are made, usually with no door left out of action overnight.
Our Somerset coverage includes Clevedon and its neighbours Nailsea, Portishead and Weston-super-Mare; tell us your postcode and preferred dates and we'll confirm a survey slot.
Which rules apply in Clevedon?
Fire doors in Clevedon sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
Guide prices in Clevedon
Guide prices for FD90 and FD120 fire doors in Clevedon run from about £1,900 to £3,800 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Where FD90 and FD120 fire doors are needed
Typical uses for FD90 and FD120 fire doors in Clevedon include high fire-load stores and transformer and switch rooms.
Somerset includes Bath's Georgian conversions and student housing, Weston-super-Mare's hotels and Taunton and Yeovil's town centres.
- High fire-load stores
- Transformer and switch rooms
- Generator rooms
- Separating walls with long ratings
What you get with each doorset
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
How it works in Clevedon
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Questions about FD90 and FD120 fire doors in Clevedon
Can you work around tenants or staff in Clevedon?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
How quickly can you survey in Clevedon?
We arrange surveys around your access needs and, where possible, combine Clevedon visits with other work in Somerset. Tell us your preferred dates when you enquire.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Clevedon.
Can FD120 doors have glass?
Yes, with insulating fire glass tested in that doorset, but panel size is usually limited.
Also covering towns near Clevedon
- Nailsea (4 miles)
- Portishead (5 miles)
- Weston-super-Mare (9 miles)
- Bristol (11 miles)
- Newport, Gwent (12 miles)
- Penarth (14 miles)
Other fire doors in Clevedon
- Composite Fire Doors in Clevedon
- Security Fire Doors in Clevedon
- Glazed Fire Doors in Clevedon
- Commercial & Office Fire Doors in Clevedon
- Fire Exit Doors in Clevedon
- Fire Door Replacement in Clevedon
- FD30 Fire Doorsets in Clevedon
- HMO Fire Doors in Clevedon
- FD90 & FD120 Doorsets across Somerset
- All fire doors in Clevedon