Our Nailsea supply and fit service
We fit FD90 and FD120 steel doorsets for plant and high-risk rooms in Nailsea and the rest of Somerset. The process is simple: we survey and measure each opening, propose a certified doorset for it, and give you a fixed price. Fitting is booked once the doorsets are made, usually with no door left out of action overnight.
Nailsea is about 17 miles from Bath; we cover both, along with Portishead, Clevedon and Bristol.
What the law says in Nailsea
Fire doors in Nailsea sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
Guide prices in Nailsea
Our guide for FD90 and FD120 fire doors is £1,900–£3,800 per single doorset fitted, ex VAT. Quotes for Nailsea are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Typical uses in Nailsea
Wherever they are in Nailsea, FD90 and FD120 fire doors are most often specified for high fire-load stores and separating walls with long ratings.
Somerset includes Bath's Georgian conversions and student housing, Weston-super-Mare's hotels and Taunton and Yeovil's town centres.
- High fire-load stores
- Separating walls with long ratings
- Transformer and switch rooms
- Generator rooms
FD90 & FD120 Doorsets: key specification
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
What happens next
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Your questions answered
Can you fit just one door in Nailsea?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Somerset.
Do you work for landlords and managing agents in Nailsea?
Yes. We can schedule doors flat by flat, send quotes per property and invoice the managing agent or freeholder.
What does a Nailsea quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Do these doors need panic hardware?
Only where they are on an escape route and the fire strategy calls for it. Panic hardware must be tested with the doorset.
Also covering towns near Nailsea
- Portishead (4 miles)
- Clevedon (4 miles)
- Bristol (7 miles)
- Kingswood (11 miles)
- Weston-super-Mare (11 miles)
- Mangotsfield (12 miles)
Also available in Nailsea
- Double & Leaf-and-a-Half Fire Doors in Nailsea
- Fire Doors for Homes in Nailsea
- Fire Door Replacement in Nailsea
- HMO Fire Doors in Nailsea
- Riser & Service Cupboard Doors in Nailsea
- Fire Door Supply & Fit in Nailsea
- Timber Fire Doorsets in Nailsea
- Steel Fire Doors in Nailsea
- FD90 & FD120 Doorsets across Somerset
- All fire doors in Nailsea