Getting FD90 and FD120 fire doors fitted in Kingswood
Looking for FD90 and FD120 fire doors in Kingswood? Our supply and fit service covers BS15 and the surrounding area, including Mangotsfield and Bristol. We quote complete doorsets — leaf, frame, seals, hinges and closer — because that is what the fire certification actually covers.
Kingswood is about 30 miles from Gloucester; we cover both, along with Mangotsfield, Bristol and Yate.
Which rules apply in Kingswood?
Fire doors in Kingswood sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
What do FD90 and FD120 fire doors cost in Kingswood?
Our guide price for FD90 and FD120 fire doors in Kingswood is £1,900 to £3,800 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Typical uses in Kingswood
Typical uses for FD90 and FD120 fire doors in Kingswood include high fire-load stores and transformer and switch rooms.
Gloucestershire mixes Cheltenham's Regency conversions and offices with Gloucester's regenerated docks and the Bristol fringe around Kingswood.
- High fire-load stores
- Transformer and switch rooms
- Generator rooms
- Separating walls with long ratings
FD90 & FD120 Doorsets: key specification
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
Four steps to compliant doors
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Common questions in Gloucestershire
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Kingswood.
Will I get certificates for the doors fitted in Kingswood?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Do you cover Kingswood?
Yes. We survey, supply and fit FD90 and FD120 fire doors throughout Kingswood and the rest of Gloucestershire, including BS15 and nearby Mangotsfield.
Are FD120 doors always steel?
Most are, though some specialist timber and composite systems hold longer ratings. The evidence for the exact configuration is what counts.
FD90 & FD120 Doorsets near Kingswood
- Mangotsfield (2 miles)
- Bristol (4 miles)
- Yate (7 miles)
- Bath (8 miles)
- Nailsea (11 miles)
- Portishead (11 miles)
Also available in Kingswood
- HMO Fire Doors in Kingswood
- FD60 Fire Doorsets in Kingswood
- Glazed Fire Doors in Kingswood
- Fire Door Supply & Fit in Kingswood
- Fire Door Ironmongery & Closers in Kingswood
- Communal & Corridor Fire Doors in Kingswood
- Fire Doors for Homes in Kingswood
- Timber Fire Doorsets in Kingswood
- FD90 & FD120 Doorsets across Gloucestershire
- All fire doors in Kingswood